Restore proper A/C cooling with the Agility Autoparts A/C Condenser 7014883, a parallel-flow condenser that drops in as a direct-fit replacement for the 2003 Ford E-550 Super Duty, 2000-2005 Ford Excursion, and 1999-2007 Ford F-250, F-350, F-450 and F-550 Super Duty [All engines]. The condenser sheds heat from the high-pressure refrigerant leaving the compressor so it condenses into a liquid before reaching the expansion valve or orifice tube.
- Parallel-flow aluminum core: Aluminum construction with a 0.750 in core thickness, 22.875 in core height and 30.125 in core length, built with mini-micro extruded tube technology for enhanced thermal performance.
- 1/2 female P-nut couplings: Inlet and outlet fittings are 1/2 Female P Nut Coupling.
- Certified quality: Engineered and manufactured under ISO TS16949 quality systems, 100% leak tested, and built to meet or exceed OE specifications for a drop-in fit.
Note: this condenser cannot be properly flushed, so replace it rather than attempting to flush the system through it. Country of origin: China.
Interchange: 24-31070 · 31-4883 · 7-4883
2431070 · 314883 · 74883 · AF602 · P40190P · 3158 · AC3572 · AC4883 · 3572 · 4883 · 3C3419710AB · 3C3Z19712AA · 6C3Z19712AA · F81HAB · F81Z19712AA · F81ZAA · AUC4883 · YJ408 · 40190 · 640190 · 1040190 · 1160
This part cross-references / interchanges with the following part numbers:
Frequently Asked Questions
What vehicles does the Agility 7014883 condenser fit?
It's a direct-fit replacement for the 2003 Ford E-550 Super Duty, 2000-2005 Ford Excursion, and 1999-2007 Ford F-250, F-350, F-450 and F-550 Super Duty [All engines]. See the Buyer's Guide tab to confirm your vehicle.
What does an A/C condenser do?
It cools the high-pressure refrigerant leaving the compressor so it condenses from a hot gas into a liquid before it reaches the expansion valve or orifice tube, supporting proper A/C cooling.
What is the core made of?
It uses a parallel-flow aluminum core with a 0.750 in thickness, 22.875 in height and 30.125 in length, built with mini-micro extruded tube technology.
What are the inlet and outlet fittings?
Both the inlet and outlet use a 1/2 Female P Nut Coupling fitting.
Can this condenser be flushed during service?
No. Per the manufacturer, this condenser cannot be properly flushed, so it should be replaced rather than flushed when servicing the A/C system.
Write a Review