Anchor 10181 rear engine mount for the 2013-2018 Acura RDX V6 3.5L supports the engine and dampens vibration. This Anchor motor mount is a standard replacement grade with a solid design.
- Natural and Styrene Butadiene rubber that resists abrasion and holds up as it ages
- Chemlock® bonding agent for the rubber-to-metal bond
- Rubber made to a specific durometer (hardness) for the vehicle application
- CAD/CAM engineering for consistent quality
Quick facts
- Part: Anchor 10181 engine mount
- Fits: 2013-2018 Acura RDX V6 3.5L
- Position: Rear
- Material: Steel
- Condition: New
A worn engine mount can show up as a clunk on acceleration, deceleration or shifting, vibration at idle, or cracked or separated rubber. With the engine off and cool, look at the rubber for cracks or separation first. If it looks sound, the noise may come from another part, so find the cause before replacing the mount.
Fits
This is a direct-fit replacement for the 2013-2018 Acura RDX V6 3.5L, which takes one rear mount. The listing is a single mount.
Specifications
Fit and size
- Position: Rear
- Quantity per vehicle: 1
- Mounting hole diameter: 13.1 mm (0.52 in)
- Mounting holes: 5
- Studs: 2, M12-1.25 metric thread
Build and materials
- Type: Solid
- Construction: Stamped
- Mount material: Steel
- Bushing material: Rubber
- Finish: Painted
- Condition: New
- Warranty: Anchor 12-month warranty
- Country of origin: China
In the box
One engine mount. Mounting hardware, a mounting bracket and a heat shield are not included, so plan on new bolts, since the old ones may not be reusable.
Interchange: 50810TX4A01 · A65104 · C65104
This part cross-references / interchanges with the following part numbers:
50810TX4A01, A65104, C65104
Frequently Asked Questions
Does Anchor 10181 fit the 2013-2018 Acura RDX V6 3.5L?
Yes. Anchor 10181 is the rear engine mount for the 2013-2018 Acura RDX V6 3.5L, and that vehicle takes one.
Does this rear engine mount come with bolts and a bracket?
No. It comes without mounting hardware, a mounting bracket or a heat shield. Plan on new bolts, since the old ones may not be reusable.
Are Anchor engine mounts like this one filled with hydraulic fluid?
No. Anchor 10181 is a solid-type mount with a steel body and a rubber bushing. Anchor's hydraulic mounts are for applications where the original is hydraulic.
What thread size are the studs on this rear mount?
The mount has two studs with an M12-1.25 metric thread. Its mounting holes measure 13.1 mm (0.52 in) across.
Does Anchor 10181 interchange with part number A65104?
Yes. A65104 is one of the numbers Anchor 10181 replaces, along with 50810TX4A01 and C65104.
