Anchor 9988 front engine mount for the 2012-2018 Audi A6 4-cylinder 2.0L and other vehicles supports the engine and dampens vibration. Anchor engine mounts are engineered to OE standards using a CAD/CAM process.
- Natural and Styrene Butadiene rubber that resists abrasion and stays stable as it ages
- Chemlock® bonding agent for the rubber-to-metal bond
- Rubber made to specific Durometer (hardness) measurements for each vehicle application
- Hydraulic type filled with special hydraulic fluid to dampen excess noise and vibration
Quick facts
- Part: Anchor 9988 engine mount
- Fits: 2012-2018 Audi A6 4-cylinder 2.0L and other vehicles
- Position: Front left, front right
- Material: Aluminum
- Condition: New
A worn engine mount can show up as a clunk on acceleration, deceleration or shifting, vibration at idle, or cracked or separated rubber. A worn transmission mount can give a similar clunk, so these signs alone do not prove the engine mount is the problem.
Fits
This mount is listed for a wide range of Audi models, including the 2012-2018 Audi A6 Quattro V6 3.0L and the 2013-2018 A6 Quattro 4-cylinder 2.0L, as well as the 2012-2018 Audi A7 Quattro V6 3.0L and the 2017-2018 A7 Quattro 4-cylinder 2.0L. These cars take two front mounts, so it makes sense to swap the pair together; this listing is one mount.
Specifications
Fit and size
- Position: front left, front right
- Quantity per vehicle: 2
- Mounting hole diameter: 12.2 mm (0.48 in)
- Mounting holes: 3
Build and materials
- Type: Electronic and Hydraulic
- Mount material: Aluminum
- Bracket material: Aluminum
- Bushing material: Rubber
- Construction: Stamped
- Finish: Uncoated
- Condition: New
- Warranty: Anchor 12-month warranty
- Country of origin: China
In the box
One engine mount. Mounting hardware, a mounting bracket and a heat shield are not included, so plan on new bolts, since the old ones may not be reusable.
Interchange: 4G0199381NT · 6023413 · A70023 · 619988 · B4953 · B4954 · B70022 · B70023 · 3074H · EM7412
This part cross-references / interchanges with the following part numbers:
4G0199381NT, 6023413, A70023, 619988, B4953, B4954, B70022, B70023, 3074H, EM7412
Frequently Asked Questions
Is Anchor 9988 the right Audi A6 engine mount for 2012-2018 cars with the 4-cylinder 2.0L?
Yes. Anchor 9988 is listed for the 2012-2018 Audi A6 4-cylinder 2.0L and many other vehicles. Look up your own car's year and engine in the "Vehicles it fits" section on this page.
Does this Anchor motor mount go on the front left or front right?
Either side. Anchor 9988 is listed for both the front left and the front right, and the car takes two mounts in total.
Does Anchor 9988 come with bolts or a bracket?
No. Anchor 9988 is one engine mount; mounting hardware, a mounting bracket and a heat shield are not included, so plan on new bolts.
Is the Anchor 9988 mount made of rubber or aluminum?
Both. The mount and bracket are aluminum, and the bushing is rubber, made from natural and Styrene Butadiene rubber and bonded with Chemlock® bonding agent.
Is Anchor 9988 a hydraulic engine mount?
Its type is listed as electronic and hydraulic. Hydraulic mounts are filled with special hydraulic fluid to dampen excess noise and vibration.
