Arnott Industries Air Spring to Coil Spring Conversion Kit P/N:C-2667
Arnott Industries C-2988 rear air spring to coil spring conversion kit for the 2008-2009 Hummer H2 replaces the air suspension with a coil spring suspension.
A rear end that sags or rides rough can mean the air spring or its air system needs attention. A sagging rear on its own does not prove the spring is the problem, since a leaking air line is another common cause.
As a coil spring conversion for the 2008-2009 Hummer H2, this kit is designed exclusively for that vehicle.
Fit and size
Build and materials
One conversion kit with the powder-coated steel springs. The 2008-2009 Hummer H2 takes one kit.
Product information is for general reference and may contain errors. See our Disclaimer.
Is the Arnott Industries C-2988 kit made for the 2008-2009 Hummer H2?
Yes. Arnott Industries C-2988 is designed exclusively for the 2008-2009 Hummer H2 and converts its air suspension to a coil spring suspension.
What is included in the Arnott Industries C-2988 air-to-coil kit?
This listing is one complete conversion kit with powder-coated steel springs. The vehicle takes one kit.
How much load do the springs in this conversion kit carry?
The springs have a spring load of 2857.496 lb. They are compression springs with open ends at both ends.
Are the springs in this air spring conversion kit steel and powder-coated?
Yes. The springs are steel with a powder-coated finish.
Are installation instructions available for this coil spring conversion kit?
Yes. Installation instructions are available for this kit, and it is designed to be easy to install.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.