Arnott Industries A-2105 rear air suspension spring for the 1992-2011 Ford Crown Victoria and other vehicles supports the vehicle's rear load on air.
- Developed with laboratory stress tests and extensive real-world road evaluations
- Engineered for strength and durability on demanding roads
- Rolling lobe rubber bellows, 2.6 mm (0.1 in) thick
- Base cup lower mount and stud upper mount
Quick facts
- Part: Arnott Industries A-2105 air suspension spring
- Fits: 1992-2011 Ford Crown Victoria and other vehicles
- Position: Rear
- Material: Rubber bellows
- Condition: New
A sagging rear end or cracks in the bellows can mean the air suspension spring is worn. Before you replace the spring, rule out an air line leak, the compressor or a height sensor, which can produce similar symptoms. For best results, replace the rear air suspension springs as a pair; this listing is one spring, with one needed on each side of the rear axle.
Fits
It fits the 1992-2011 Ford Crown Victoria, the 1990-2011 Lincoln Town Car and the 1992-2011 Mercury Grand Marquis.
Specifications
Fit and size
- Position: Rear
- Quantity per vehicle: 2
- Bellows thickness: 2.6 mm (0.1 in)
- Lower mount: base cup
- Upper mount: stud
Build and materials
- Air spring type: rolling lobe
- Bellows material: rubber
- Grade: standard replacement
- Condition: New
- Country of origin: Mexico
In the box
One air suspension spring. Mounting hardware is not included, so plan on new hardware, since the old fasteners may not be reusable.
Interchange: 3U2Z5580AA · 3U2Z5580BA · 3U2Z5580PA · 6W1Z5560AA · F5AZ5560B · F5AZ5560BB · F8MZ5560AA · F8VZ5560AA · FOVY5560A
This part cross-references / interchanges with the following part numbers:
3U2Z5580AA, 3U2Z5580BA, 3U2Z5580PA, 6W1Z5560AA, F5AZ5560B, F5AZ5560BB, F8MZ5560AA, F8VZ5560AA, FOVY5560A
Frequently Asked Questions
Does the Arnott A-2105 rear air suspension spring fit the 1990-2011 Lincoln Town Car?
Yes. Arnott Industries A-2105 fits the 1990-2011 Lincoln Town Car, the 1992-2011 Ford Crown Victoria and the 1992-2011 Mercury Grand Marquis.
Does the A-2105 air suspension spring come with mounting hardware?
No. The Arnott Industries A-2105 is one air suspension spring and mounting hardware is not included. Plan on new hardware, as the old fasteners may not be reusable.
What type of air suspension spring is this, and what is the bellows made of?
This rear air suspension spring is a rolling lobe type with a rubber bellows 2.6 mm (0.1 in) thick. It has a base cup lower mount and a stud upper mount.
What are signs the rubber bellows on this rear air suspension spring is worn?
Visible cracks or tears in the bellows, or a rear end that sits low, can mean the spring is worn. A shop can check the air system for leaks if you are unsure.
Is the Arnott A-2105 a replacement for part number F5AZ5560B?
Yes. F5AZ5560B is on the interchange list for this Arnott Industries A-2105 rear air suspension spring.
