Arnott Industries SK-3122 rear shock absorber for the 2003-2012 Land Rover Range Rover damps rear suspension movement to keep the ride controlled. This suspension shock absorber is an Arnott design that fits either the left or right side.
- Custom-valved damper, road-tested for ride control
- Twin tube body with a gas-charged hydraulic damper
- Polyurethane bump stop, top and bottom mounts included
- Protective rubber dust boot
Quick facts
- Part: Arnott Industries SK-3122 shock absorber
- Also called: suspension shock absorber
- Fits: 2003-2012 Land Rover Range Rover
- Position: Rear
- Condition: New
A rear shock that leaks fluid, lets the body keep bouncing after bumps or knocks over rough road can be worn, though a loose upper mount or a worn lower bushing can be behind the same signs.
Fits
This shock fits the 2003-2012 Land Rover Range Rover and is designed for vehicles without VDS.
Specifications
Fit and size
- Position: Rear
- Quantity per vehicle: 2
- Upper mount type: Bolt
- Lower mount type: Loop/Eyelet
- Rod end measuring point: Shoulder of stud
Build and materials
- Construction: Twin tube
- Damper: Hydraulic, gas charged
- Adjustable damping: No
- Dust shield material: Rubber
- Grade: Standard replacement
- Condition: New
- Country of origin: United States
In the box
This listing is one rear shock absorber with mounting hardware, an upper mounting isolator, a polyurethane bump stop and a dust boot. The vehicle takes two, so order two and fit them together. Springs, spring isolators, a bearing plate and a lower mounting isolator are not included.
Interchange: 44-191177
RPD000060 · RPD000940 · RPD500260 · RPD500270 · RPD500470 · RPD500600
This part cross-references / interchanges with the following part numbers:
44-191177, RPD000060, RPD000940, RPD500260, RPD500270, RPD500470, RPD500600
Frequently Asked Questions
Does the Arnott Industries SK-3122 fit the 2003-2012 Land Rover Range Rover?
Yes. Arnott Industries SK-3122 is a rear shock absorber for the 2003-2012 Land Rover Range Rover, fits either rear side and is designed for vehicles without VDS.
Does this rear shock absorber come with its mounts?
Yes, it comes with mounting hardware, top and bottom mounts, an upper mounting isolator, a polyurethane bump stop and a dust boot; springs and spring isolators are not included.
Is this shock gas charged, and can its damping be adjusted?
Yes, the Arnott Industries SK-3122 is gas charged with a hydraulic damper. No, its damping is not adjustable; the damper is custom-valved.
How can I tell if a rear shock like this one is worn?
Fluid on the shock body, a body that keeps bouncing after bumps, or a knock over rough road can mean the shock is worn. A shop can test it.
What mount types does the SK-3122 shock have?
The upper mount is a bolt type and the lower mount is a loop/eyelet. The rod end is measured at the shoulder of the stud.
