Shopping for a Bmw X5 shock absorber that helps bring back that controlled, factory-like ride? The Arnott Industries Suspension Shock Absorber SK-3816 (also written SK3816) is a brand-new aftermarket shock that installs in the rear right position on the 2014-2018 BMW X5 (F15/F85) and 2015-2019 BMW X6 (F16/F86) equipped with VDC, replacing the worn OE unit.
Custom-valved tuning: the valving is adapted to driving style and custom-tuned to provide an OE-like ride.
Converts active to passive: replaces the electronically controlled damper with a passive shock.
Improved seals: upgraded seals designed to help prevent leaks.
Engineered and assembled in the USA.
A shock absorber damps spring oscillation to help keep the tire in contact with the road; signs one may need replacing include excessive bounce, a floaty ride, or fluid seepage at the shock body. For balanced ride control, Arnott recommends replacing shocks in pairs across the axle. This is a Bmw X6 rear shock absorber for VDC-equipped applications; confirm your vehicle in the Buyer's Guide tab.
This part cross-references / interchanges with the following part numbers:
33527856496, 37106875088, 37106875090
Frequently Asked Questions
Which vehicles does the Arnott SK-3816 shock absorber fit?
It fits the rear right position on the 2014-2018 BMW X5 (F15/F85) and the 2015-2019 BMW X6 (F16/F86) equipped with VDC. Confirm your vehicle in the Buyer's Guide tab.
Is this a Bmw X6 shock absorber for the active suspension?
Yes. It replaces the electronically controlled damper on VDC-equipped BMW X6 (F16/F86) models, converting the active shock to a passive, custom-valved shock tuned for an OE-like ride.
Where does this shock absorber install?
The catalog lists it as a rear right unit. Refer to your vehicle service information for the correct installation procedure and any related hardware.
Do I need to replace both shocks at once?
Arnott recommends replacing shocks in pairs across the axle for balanced, consistent ride control. This listing is for one shock absorber.
What are signs my shock absorber may need replacing?
Common signs include excessive bounce, a floaty or unsettled ride, and fluid seepage at the shock body. Have the cause diagnosed before replacing, as other components can produce similar symptoms.
Keep your Mercedes-Benz riding smooth with the Arnott Industries Suspension Shock Absorber (P/N SK-3311), a custom-valved twin-tube damper engineered for the rear position. It drops in as a...
Smooth out the ride at the back of your car with the Arnott Industries Suspension Shock Absorber kit, SK-2225 — a precision-tuned rear shock kit built for the 1993-1998 Lincoln Mark VIII. It replaces...
Smooth out the ride and take control of a failing electronic suspension with the Arnott Industries Front Shock Absorber kit (SK-2186, also written SK2186) — a direct-fit Cadillac Deville shock...
Keep your Cadillac riding level and controlled with the Arnott Industries Suspension Shock Absorber kit (MPN SK-2162), a Cadillac Deville shock absorber solution that drops right into the front...
WARNING:
These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov.
