Arnott Industries Suspension Strut P/N:SK-2473
Arnott Industries SK-2417 front right suspension strut for the 2003-2006 Mercedes-Benz SL55 AMG and other vehicles is a remanufactured strut that damps wheel movement. Each strut is completely disassembled and rebuilt from the ground up, and it is intended to restore factory ride and handling.
An oily film on the strut body, a torn boot, a bouncy ride or a clunk over bumps can mean a strut is worn. Before replacing it, look over the strut body and boot for oil or tears with the car parked and the engine off, and leave the rest of the suspension testing to a shop.
This strut fits the 2003-2006 Mercedes-Benz SL55 AMG and the 2005-2006 Mercedes-Benz SL65 AMG.
Fit and size
Build and materials
One front right suspension strut as a complete assembly with springs, spring seat, spring isolators and boot. The front right takes one strut; the front left is a separate part ordered on its own, and the two sides are best replaced as a pair. Mounting hardware and a bearing plate are not included, so plan on new hardware rather than reusing the old.
Interchange: 2303203013 · 2303204413 · 230320441380
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does the Arnott Industries SK-2417 strut fit the 2005-2006 Mercedes-Benz SL65 AMG?
Yes. Arnott Industries SK-2417 is a front right strut that fits the 2005-2006 Mercedes-Benz SL65 AMG as well as the 2003-2006 Mercedes-Benz SL55 AMG.
Does the SK-2417 strut come with springs and a boot?
Yes. Arnott Industries SK-2417 is a complete assembly with springs, spring seat, spring isolators and boot. Mounting hardware and a bearing plate are not included.
What kind of mounts does this front right strut have?
The upper mount is a bolt type and the lower mount is a loop/eyelet type. Internal construction is twin tube with a linear spring rate.
How do I tell if my front right strut is worn?
Signs can include oil on the strut body, a bouncy ride after bumps or nose dive when braking. A shop can test the strut if you are unsure.
Is the seal in this Arnott strut polyurethane?
Yes. Arnott Industries SK-2417 has a polyurethane seal designed and tested for many years of service, and the strut is remanufactured and tested in the USA.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.