Arnott Industries Suspension Strut P/N:SK-2461
Arnott Industries SK-2472 rear right suspension strut for the 2007-2012 Mercedes-Benz SL500 and other vehicles damps spring movement at the rear right wheel. This remanufactured strut is disassembled and rebuilt from the ground up to help restore factory ride and handling.
A worn rear strut can show up as a bouncy or floating ride, a film of oily fluid on the strut body or uneven rear tire wear. These signs alone do not prove the strut is the problem, since worn tires can cause a similar ride complaint.
This strut fits the 2007-2012 Mercedes-Benz SL500, the 2007-2012 Mercedes-Benz SL550 and the 2007-2012 Mercedes-Benz SL600, non-AMG models only. These cars take one strut on each side of the rear axle. This listing is the rear right; the rear left is a separate part that is normally replaced at the same time.
Fit and size
Build and materials
One rear right strut assembly with its coil spring, spring seat, spring isolators and boot. Mounting hardware and a bearing plate are not included, so plan on new bolts rather than reusing the old ones.
Interchange: 230320043880 · 2303204638 · 2303205813 · 3203200438
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this a strut replacement for the 2007-2012 Mercedes-Benz SL500?
Yes. Arnott Industries SK-2472 is a rear right strut for the 2007-2012 Mercedes-Benz SL500, and it is for non-AMG models only.
Does the SK-2472 strut come with the spring and boot?
Yes. Arnott Industries SK-2472 is a complete assembly with the coil spring, spring seat, spring isolators and boot. Mounting hardware and a bearing plate are not included.
Is this rear strut a twin-tube design?
Yes. This strut has twin-tube internal construction and a linear spring rate. The lower mount is a loop/eyelet type and the upper mount is a bolt type.
How can I check a rear strut for wear before replacing it?
With the car parked and cool, look for oily fluid on the strut body, a torn boot or a sagging rear corner. A shop can inspect the rest.
Is the Arnott SK-2472 strut new or remanufactured?
It is remanufactured. Arnott Industries SK-2472 is disassembled, rebuilt from the ground up and tested in the USA.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.