Atlantic Automotive Engineering Power Steering Pump P/N:5642N
Atlantic Automotive Engineering 5707N power steering pump for the 2006-2007 Honda Accord and other vehicles supplies hydraulic pressure to the steering system. This new hydraulic pump is a direct replacement for failed OEM units.
A whine or groan when turning, heavy steering or fluid around the pump can mean the pump is wearing out. A leaking hose, low fluid or a fault elsewhere in the steering system can be behind the same signs, so find the cause before buying a pump. The 2006-2007 Honda Accord takes one.
This pump is listed for a wide range of Honda and Acura models, led by the 2006-2007 Honda Accord, the 2005-2011 Honda CR-V and the 2006-2011 Honda Element. If your car is not named here, look it up in the "Vehicles it fits" section.
Fit and size
Build and materials
One power steering pump with a return pipe adapter. The pulley, reservoir, reservoir cap, filter and mounting hardware are not included, and the old hardware may not be reusable, so plan on new pieces.
Interchange: 56110PND003 · 56110RWC305 · 56110RWCA01 · 56110PNB306 · 56110PNBA01 · 56110PNBA03 · 56110PNBA04 · 56110PNBA05 · 56110PNDA01 · 56110PNDA51 · 56110PNDJ01 · 56110PZDA02 · 56110RAAA02 · 56110RBBE02 · 56110RTA003 · 56110RTA013
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is the Atlantic Automotive Engineering 5707N a 2007 Honda CR-V power steering pump within the 2005-2011 range?
Yes. The 2005-2011 Honda CR-V, which includes 2007, is listed for Atlantic Automotive Engineering 5707N, and each vehicle takes one pump.
Does the 5707N work as a Honda Element power steering pump for the 2006-2011 Honda Element?
Yes. The 2006-2011 Honda Element is listed for this pump, and it takes one.
Does this power steering pump come with a pulley or reservoir?
No. This Atlantic Automotive Engineering 5707N comes with a return pipe adapter only. The pulley, reservoir, reservoir cap, filter and mounting hardware are not included.
What size are the inlet and outlet ports on this power steering pump?
Both the inlet and the outlet measure 18 mm. The hose port type is a hose barb, with a clamp-on inlet attachment and an O-ring outlet attachment.
Should I flush the steering system when fitting this power steering pump?
Yes. Flush and fill the steering system with an OE approved power steering fluid, which helps protect the pump's long life.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.