Atlantic Automotive Engineering Power Steering Pump P/N:5776N
Atlantic Automotive Engineering 5821N power steering pump for the 2008-2012 Honda Accord supplies the hydraulic pressure that gives the steering its power assist. Each unit is made with OE quality components and engineered to OE specifications or better in performance, fit and function.
A whine or groan when turning, a heavy steering wheel or fluid leaking at the pump can mean the pump is worn, though a clogged reservoir or a leaking hose can be behind the same signs, so find the cause before replacing it. If a worn pump is the cause, this one replaces it.
This pump is a direct-fit replacement for the 2008-2012 Honda Accord.
Fit and size
Build and materials
This listing is one power steering pump with its pulley and a return pipe adapter, and the 2008-2012 Honda Accord takes one. The reservoir, reservoir cap and mounting hardware are not included, so plan on new mounting hardware rather than reusing the old pieces.
Interchange: 56100R40305 · 56100R40315 · 56100R40325 · 56100R40A02 · 56100R40A03 · 56100R40A04 · 56100R40A05 · 56100R40A06 · 56100R40A07 · 56100R40A08 · 56100R40P05
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is the 5821N a 2008 Honda Accord power steering pump replacement?
Yes. Atlantic Automotive Engineering 5821N is a direct-fit replacement for the 2008-2012 Honda Accord, including the 2008 model year, and the car takes one pump.
Will the 5821N work as a 2009 Honda Accord power steering pump replacement?
Yes. The 2009 model year sits inside the 2008-2012 Honda Accord fitment for this pump, and one pump is needed per car.
Does this power steering pump come with the pulley and the reservoir?
The pulley and a return pipe adapter are included. The reservoir, the reservoir cap and mounting hardware are not part of this listing.
What size are the inlet and outlet on this steering pump?
Atlantic Automotive Engineering 5821N has an 18.0 mm inlet with a clamp-on attachment and an 18.0 mm outlet with an O-ring attachment. The hose port type is hose barb.
Does the steering system need flushing when I install this pump?
Yes. Flushing and refilling the system with an OE approved power steering fluid is called for, to protect the pump's long life and OE operation.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.