Atlantic Automotive Engineering Power Steering Pump P/N:5776N
Atlantic Automotive Engineering 63187N power steering pump for the 2008-2010 Ford F-250 Super Duty and other vehicles builds the hydraulic pressure that assists steering. It is a direct replacement for failed OEM units, built with OE quality components.
A whine or groan when turning, heavy steering or a fluid leak can point to a failing power steering pump. Before you replace the pump, rule out low fluid, a worn drive belt or a leaking hose, which can cause steering trouble of their own.
It is listed for a wide range of Ford models, including the 2008-2010 Ford F-350 Super Duty and the 2008-2010 Ford F-450 Super Duty. The 2008-2010 Ford F-250 Super Duty takes one. Look up your own truck in the "Vehicles it fits" section to see whether it is covered.
Fit and size
Build and materials
One power steering pump and its return pipe adapter. The pulley, reservoir, reservoir cap, filter and mounting hardware are not included, so plan on new bolts rather than reusing the old ones.
Interchange: 7C3Z3A674C · 7C3Z3A674CB · 7C3Z3A674CBRM
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does the 2008-2010 Ford F-350 Super Duty take this Atlantic Automotive Engineering 63187N pump?
Yes, Atlantic Automotive Engineering 63187N is listed for the 2008-2010 Ford F-350 Super Duty and the 2008-2010 Ford F-450 Super Duty; look up other trucks in the "Vehicles it fits" section.
Does this Atlantic Automotive Engineering power steering pump come with the pulley and reservoir?
No, the pulley, reservoir, reservoir cap, filter and mounting hardware are not included; the pump comes with a return pipe adapter.
What kind of fittings does the 63187N pump have?
Atlantic Automotive Engineering 63187N is a hydraulic pump with a clamp-on inlet and a threaded outlet.
Could a groaning noise when turning mean my power steering pump is worn?
Yes, a whine or groan when turning, heavy steering or fluid leaks can mean the pump is worn. Because steering is affected, have it inspected promptly rather than driving on it.
Do I need to flush the steering system when fitting this pump?
Yes, the steering system should be flushed and filled with an OE approved power steering fluid. Replacing the reservoir at the same time is highly recommended, because a clogged one can starve the new pump.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.