Atlantic Automotive Engineering Power Steering Pump P/N:5663N
Atlantic Automotive Engineering 63278N power steering pump for the 2010-2012 Ford Taurus and other vehicles supplies the hydraulic pressure behind power steering assist. It replaces a failed OE pump and is engineered to OE specifications or better for performance, fit and function.
A failing pump can show up as a whine when you turn, stiff or heavy steering, or fluid at the pump. A leaking hose or fitting can give similar symptoms, so with the engine off and cool, look over the hoses and fittings for wet spots before you decide the pump is at fault.
This is a 2011 Ford Taurus power steering pump replacement, and the same part number covers the rest of the 2010-2012 Taurus years. The vehicles it fits include the 2009-2012 Ford Flex and the 2009-2012 Lincoln MKS. If your car is not named here, open the "Vehicles it fits" section to check your exact model and engine.
Fit and size
Build and materials
One power steering pump with its pulley and a return pipe adapter. The reservoir, reservoir cap, filter and mounting hardware are not included, so plan on new mounting bolts instead of reusing the old ones. This listing holds one pump, and each vehicle takes one.
Interchange: 8A8Z3A674A · 8A8Z3A674B · 8A8Z3A674C
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this the right Ford Taurus power steering pump for the 2010-2012 model years?
Yes. Atlantic Automotive Engineering 63278N is listed for the 2010-2012 Ford Taurus, and each car takes one pump. For another car, open the "Vehicles it fits" section and check your exact model and engine.
Is this a Ford Flex power steering pump for 2009-2012 models?
Yes. The 2009-2012 Ford Flex is on the fitment list for Atlantic Automotive Engineering 63278N, and each car takes one pump.
Does the 63278N power steering pump come with its pulley?
Yes. Atlantic Automotive Engineering 63278N comes with the pulley and a return pipe adapter. The reservoir, reservoir cap, filter and mounting hardware are not included.
What kind of inlet and outlet connections does this power steering pump have?
The inlet attachment is clamp-on and the outlet attachment is threaded.
Should I replace the reservoir when I install this power steering pump?
Replacing it is highly recommended, since a clogged reservoir can starve a replacement pump. Flush and fill the steering system with an OE approved power steering fluid as well.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.