ATP Engine Harmonic Balancer P/N:102110
ATP 102008 harmonic balancer for the 1964-1968 Ford Mustang V8 4.7L, the 1965 Mustang V8 4.3L and other vehicles absorbs crankshaft vibrations. The ATP harmonic balancer fits and works like the original part to help return the engine to normal operation.
A worn drive belt or a misaligned accessory pulley can be behind belt misalignment too, so find the cause before buying a harmonic balancer. If the rubber or fluid layer has deteriorated, the outer pulley can shift forward, and a broken harmonic balancer must be replaced.
This harmonic balancer is listed for a wide range of Ford and Mercury models, including the 1966-1968 Ford Bronco V8 4.7L, the 1963-1964 Ford Falcon V8 4.3L and the 1964-1968 Falcon V8 4.7L. Open the "Vehicles it fits" section to check your exact model and engine.
One harmonic balancer. Each vehicle takes one.
Interchange: PB1008-N · DA-289
BA289N · C3AZ6316B · C50Z6316C · C5AZ6312A · C5AZ6316B · 309260 · 872019 · V1064
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this harmonic balancer right for the 1964-1968 Ford Mustang V8 4.7L or the 1965 Mustang V8 4.3L?
Yes. ATP 102008 is listed for the 1964-1968 Ford Mustang V8 4.7L and the 1965 Mustang V8 4.3L. Each of these cars takes one.
Is this the right harmonic balancer for the 1963-1964 Ford Falcon V8 4.3L and the 1964-1968 Falcon V8 4.7L?
Yes. ATP 102008 is listed for both of those Falcon runs. For another Ford or Mercury model, open the "Vehicles it fits" section.
How does the hub on this harmonic balancer attach to the engine?
The hub bolts directly to the crankshaft. A rubber or fluid layer surrounds the hub to dampen crankshaft vibration, and the metal outer layer carries the belt grooves.
What happens when an engine harmonic balancer wears out?
The rubber or fluid layer can deteriorate, which lets the outer pulley shift forward and the belt run out of line. Over time that can lead to crankshaft failure, so a broken harmonic balancer must be replaced.
Does ATP 102008 replace the number C5AZ6316B?
Yes. C5AZ6316B is on the Interchange line for ATP 102008, along with C3AZ6316B and C5AZ6312A, so you can match it against an old part's number.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.