Autobest HP1075A rear fuel pump and strainer set for the 1990-1996 Ford F-150 6-cylinder 4.9L, V8 5.0L or 5.8L and other vehicles moves fuel from the tank to the engine. This Autobest fuel pump mounts inside the tank and draws fuel in through its strainer.
- Pump tested at many points in manufacturing for durability and reliability
- Ethanol tolerance designed for today's fuel systems
- Turbine pump with an average flow rating of 31.7 GPH
- Pump pressure from 7.25 PSI minimum to 21.76 PSI maximum
- Internal strainer included to screen debris before fuel enters the pump
- Single quick-connect outlet for the fuel line
Quick facts
- Part: Autobest HP1075A fuel pump and strainer set
- Fits: 1990-1996 Ford F-150 6-cylinder 4.9L, V8 5.0L or 5.8L and other vehicles
- Position: Rear
- Material: POM housing, NBR gasket or seal
A failing fuel pump can cause hard starting, sputtering or power loss under load, or a whine from the tank. These signs alone don't prove the pump is at fault, because a clogged fuel filter can cause them too. The rear position takes one pump, and this listing is one set.
Fits
Other trucks this fuel pump fits include the 1990-1996 Ford F-250 6-cylinder 4.9L, V8 5.0L, 5.8L or 7.5L, the 1990-1996 Ford F-350 6-cylinder 4.9L and the 1990-1997 F-350 V8 5.8L or 7.5L.
Specifications
Fit and size
- Position: Rear, in tank
- Quantity per vehicle: 1
- Pump size: 6.16 in high, 3.35 in long, 3.27 in wide
- Inlet: strainer type, internal strainer
- Outlet: 1, quick connect
Build and materials
- Pump type: Turbine
- Average flow rating: 31.7 GPH
- Pump pressure: 7.25-21.76 PSI
- Electrical: 12V, negative ground, 6 A average current draw
- Housing material: POM
- Gasket or seal material: NBR
- Country of origin: China
In the box
One fuel pump and strainer set: the pump, its internal strainer and a gasket or seal. The wire harness, fuel filter, fuel sending unit, fuel tank pressure sensor and regulator are not included.
Product information is for general reference and may contain errors. See our Disclaimer.
Frequently Asked Questions
Is the HP1075A one of the 1990-1996 Ford F-150 fuel pumps for the 6-cylinder 4.9L, V8 5.0L or 5.8L?
Yes, the Autobest HP1075A rear fuel pump and strainer set fits the 1990-1996 Ford F-150 6-cylinder 4.9L, V8 5.0L or 5.8L; if you drive another truck, look it up in the "Vehicles it fits" section.
What flow rate and pressure does the HP1075A turbine pump deliver?
The Autobest HP1075A has an average flow rating of 31.7 GPH and a pump pressure range of 7.25 to 21.76 PSI on a 12V negative-ground system.
Does this fuel pump and strainer set come with a wire harness or sending unit?
No. This set includes the pump, its internal strainer and a gasket or seal; the wire harness, fuel sending unit, fuel filter and regulator are not included.
How can I tell if a rear in-tank fuel pump is wearing out?
A worn rear in-tank fuel pump can make the engine slow to start, cut out or lose power when pulling a load, or whine from the tank. Have it checked or replaced promptly.
Is this Autobest pump made to handle ethanol in today's fuel?
Yes. This rear fuel pump is designed with ethanol tolerance for today's fuel systems, and each pump is tested at many points during manufacturing.
