Autobest Fuel Pump Module Assembly P/N:F4799A
Autobest F1460A fuel pump module for the 2008-2009 Ford Fusion 4-cylinder 2.3L and other vehicles sends fuel from the tank to the engine under pressure. This fuel pump assembly sits inside the tank, and its sending unit reads the fuel level for your gauge.
A worn fuel pump module can show up as hard starting, sputtering or lost power under load, or a fuel gauge that reads wrong. These signs alone don't prove the module has failed; a bad fuel pump relay is another common cause.
It fits the 2008-2009 Ford Fusion 4-cylinder 2.3L and the 2008-2009 Mercury Milan 4-cylinder 2.3L, and each takes one module.
Fit and size
Build and materials
One fuel pump module with its fuel sending unit, regulator, fuel filter, internal strainer and gasket or seal. The wire harness, mounting hardware and fuel tank pressure sensor are not included; the original mounting hardware may not be reusable, so plan on new pieces.
Interchange: 6E5Z-9H307F · 7E5Z-9H307S · 8E5Z-9H307S · PFS-352 · PFS-388 · PFS-450 · 402-P2459M
E2459M · 69179 · P76450M · FG1138 · SP2367M · 150138 · USEP2459M
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does the Autobest F1460A fit the 2008-2009 Mercury Milan 4-cylinder 2.3L?
Yes. The Autobest F1460A fuel pump module fits the 2008-2009 Mercury Milan 4-cylinder 2.3L as well as the 2008-2009 Ford Fusion 4-cylinder 2.3L, and each takes one.
Does the F1460A module come with the fuel sending unit and filter?
Yes. The Autobest F1460A includes the fuel sending unit, regulator, fuel filter, strainer and gasket or seal; the wire harness, mounting hardware and fuel tank pressure sensor are not included.
What fuel pressure does this Autobest fuel pump module put out?
This fuel pump module is rated at 59 PSI minimum and 64 PSI maximum, with an average flow rating of 36.7 GPH. It runs on 12V with an average current draw of 9.9 A.
How can I tell if this in-tank fuel pump module is going bad?
Hard starting, sputtering under load and a fuel gauge that reads wrong can all mean the fuel pump module is failing. A shop can test fuel pressure against its 59-64 PSI rating.
Does this fuel pump module replace part number 8E5Z-9H307S?
Yes. Part number 8E5Z-9H307S is one of the interchange numbers for this fuel pump module, along with 7E5Z-9H307S and PFS-450.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.