Autobest Fuel Pump Module Assembly P/N:F4799A
Autobest F2383A fuel pump module for the 1998-2000 Chevrolet Venture V6 3.4L and other vehicles moves fuel from the tank to the engine. The module, also called a fuel pump assembly, sits in the tank and pairs a turbine pump with a fuel sending unit.
A weak pump can show up as hard starting, an engine that stumbles or stalls under load, or a whine from the tank. A fuel gauge that reads wrong can also come from the sending unit. These signs can have other fuel-system or wiring causes, so with the engine off, look at the pump connector and wiring for damage or corrosion first, and leave fuel pressure testing to a shop. The 1998-2000 Chevrolet Venture V6 3.4L takes one module.
It fits the 1998-2000 Chevrolet Venture V6 3.4L, the 1998-2000 Oldsmobile Silhouette V6 3.4L and the 1999-2000 Pontiac Montana V6 3.4L, and it is listed for several other Chevrolet, Oldsmobile and Pontiac models. If your car is not named here, look up its year and engine in the "Vehicles it fits" section.
Fit and size
Build and materials
One fuel pump module with its wire harness, fuel sending unit, fuel tank pressure sensor, strainer and gasket or seal. The fuel filter, regulator and mounting hardware are not included, so plan on new mounting hardware.
Product information is for general reference and may contain errors. See our Disclaimer.
Does the Autobest F2383A fuel pump module fit a 1998-2000 Oldsmobile Silhouette V6 3.4L?
Yes. Autobest F2383A is listed for the 1998-2000 Oldsmobile Silhouette V6 3.4L. For another year or engine, look up your car in the "Vehicles it fits" section.
Does this fuel pump module come with a fuel filter or mounting hardware?
No. The fuel filter, regulator and mounting hardware are not included. It does come with a wire harness, fuel sending unit, fuel tank pressure sensor, strainer and gasket or seal.
What flow and pressure does the Autobest F2383A turbine pump give?
Autobest F2383A has an average flow rating of 33 GPH and a pump pressure range of 87 to 145 PSI. It runs on 12V.
What size are the inlet and outlet connections on this fuel pump module?
The inlet is 5/16 quick connect and the outlet is 3/8 quick connect. The electrical side has one male rectangle connector with four male pin terminals.
What is the housing of this fuel pump module made of?
The housing is POM, and the gasket or seal is NBR.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.