Fuel Pump Module for 1996 Dodge B2500 & More - Autobest F3111A

$164.99
WARNING:California Proposition 65▾
Sold out

Vehicles this part fits

    Part number: F3111A
    UPC: 072845131119
    Condition: New
    Weight: 5.95 LBS
    Item Package Quantity: 1
    $164.99

    Out of stock

    Have questions?

    Autobest Fuel Pump Module Assembly P/N:F3111A
    Autobest Fuel Pump Module Assembly P/N:F3111A
    $164.99
    $164.99

    Autobest F3111A fuel pump module for the 1996 Dodge B2500 V6 3.9L, V8 5.2L or 5.9L and other vehicles sits in the fuel tank and sends fuel to the engine. It carries the pump, the fuel sending unit for the gauge, the pressure regulator and the strainer in one unit.

    • Fuel pump module built for ethanol tolerance in today's fuel systems
    • Every Autobest fuel pump is tested at each stage of the manufacturing process
    • Rollervane in-tank pump with a 35.7 GPH average flow rating
    • Pump pressure runs from 47.3 to 51.3 PSI on a 12V system
    • Fuel sending unit reads 102 ohms empty and 8 ohms full
    • Housing made of POM, with an internal strainer at the pump inlet

    Quick facts

    • Part: Autobest F3111A fuel pump module
    • Also called: Fuel pump assembly
    • Fits: 1996 Dodge B2500 V6 3.9L, V8 5.2L or 5.9L and other vehicles
    • Material: POM housing

    A failing fuel pump module can show up as hard starting, sputtering or lost power under load, or a fuel gauge that reads wrong. Before you replace it, look at the fuel pump fuse with the engine off to see if it has blown; a shop can run a fuel pressure test to find the cause. One module mounts inside the fuel tank.

    Fits

    It fits the 1996 Dodge B2500 V6 3.9L, V8 5.2L or 5.9L, the 1996 Dodge B1500 V6 3.9L or V8 5.2L and the 1996 Dodge B3500 V8 5.2L or 5.9L as a direct-fit replacement.

    Specifications

    Fit and size

    • Mounting: in tank
    • Quantity per vehicle: 1
    • Outlet: 3/8 in quick connect
    • Electrical connector: 1 rectangular female, 6 male pin terminals

    Build and materials

    • Pump type: Rollervane
    • Housing material: POM
    • Strainer: internal
    • Flow and pressure: 35.7 GPH average, 47.3-51.3 PSI
    • Electrical: 12V, 7.5 A average current draw
    • Sending unit resistance: 102 ohms empty, 8 ohms full
    • Warranty: Autobest 12 month unlimited mileage warranty
    • Country of origin: China

    In the box

    One fuel pump module with the pump, fuel sending unit, regulator, strainer and gasket or seal. The wire harness, fuel filter, fuel tank pressure sensor and mounting hardware are not included, and the old mounting hardware may not be reusable, so plan on new pieces.

    Interchange: 520-2160
    MU2041 · E7100M · P321M · 67647 · P74698M · FG0368 · EFP133M · EFP7100M · EG100M · PN3193 · SP7100M · 150298 · USEP7100M

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    MU2041, E7100M, P321M, 67647, P74698M, FG0368, 520-2160, EFP133M, EFP7100M, EG100M, PN3193, SP7100M, 150298, USEP7100M

    Frequently Asked Questions

    Will the Autobest F3111A fit a 1996 Dodge B2500 with the V8 5.9L?

    Yes. The Autobest F3111A fuel pump module fits the 1996 Dodge B2500 with the V6 3.9L, V8 5.2L or 5.9L engine, and one module goes in the fuel tank.

    Does this fuel pump assembly come with the sending unit and strainer?

    Yes. The Autobest F3111A comes with the pump, fuel sending unit, regulator, strainer and gasket or seal; the wire harness, fuel filter and mounting hardware are not included.

    What pressure and flow does this rollervane fuel pump module put out?

    This fuel pump module is rated for 47.3 to 51.3 PSI and a 35.7 GPH average flow on a 12V system, with a 7.5 A average current draw.

    Can a fuel gauge that reads wrong mean the sending unit on this module is worn?

    Yes, it can. A gauge that reads wrong, hard starting or sputtering under load can each mean a worn fuel pump module; this module's sending unit reads 102 ohms empty and 8 ohms full.

    Is this Autobest fuel pump module made to handle ethanol in today's fuel?

    Yes. This fuel pump module is built for ethanol tolerance in today's fuel systems, and every Autobest fuel pump is tested at each stage of manufacturing.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review