Autobest Fuel Pump Module Assembly P/N:F4799A
Autobest F3133A fuel pump module for the 1997-1999 Jeep Wrangler 4-cylinder 2.5L or 6-cylinder 4.0L and other vehicles moves fuel from inside the tank toward the engine. Also called a fuel pump assembly, it combines the pump and module in one unit.
A tired pump can show up as hard starting, sputtering at speed or a loss of power. Before you replace the module, rule out a clogged fuel filter, a blown fuse or relay and damaged wiring, since any of them can produce similar symptoms.
The module fits the 1997-1999 Jeep Wrangler 4-cylinder 2.5L or 6-cylinder 4.0L and the 1997-1999 Jeep TJ 4-cylinder 2.5L or 6-cylinder 4.0L. Each takes one, mounted in the fuel tank, and this listing is one module.
Fit and size
Build and materials
One fuel pump module with the pump, strainer, regulator, fuel sending unit and gasket or seal. The wire harness, fuel filter, mounting hardware and fuel tank pressure sensor are not included; plan on new mounting hardware, since the old pieces may not be reusable.
Interchange: 520-2630 · 402-P7122MN
E7122MN · P407M · 67659 · P75046M · FG1355 · EFP7122M · SP7122M · 150194 · USEP7122M
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does the Autobest F3133A fuel pump module fit the 1997-1999 Jeep Wrangler 4-cylinder 2.5L or 6-cylinder 4.0L?
Yes. Autobest F3133A fits the 1997-1999 Jeep Wrangler with either the 4-cylinder 2.5L or the 6-cylinder 4.0L, and the 1997-1999 Jeep TJ with those same two engines.
Does this fuel pump module come with a fuel filter or wire harness?
No. The module includes the pump, strainer, regulator, fuel sending unit and gasket or seal, but not the wire harness, fuel filter, mounting hardware or fuel tank pressure sensor.
What flow and pressure does the Autobest F3133A pump deliver?
Autobest F3133A has an average flow rating of 42 GPH and a pump pressure of 80 to 100 PSI on 12V, with an average current draw of 7 A.
What are the signs this in-tank fuel pump module is wearing out?
A whine from the tank, stalling or trouble starting can mean the pump is weakening. A shop can test fuel pressure to confirm it.
What resistance does the fuel sending unit on this module read?
The fuel sending unit on this module is rated at 270 ohms when the tank is empty and 20 ohms when it is full.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.