Autobest Fuel Pump Module Assembly P/N:F1556A
Autobest F3162A fuel pump module for the 2001 Dodge Stratus 4-cylinder 2.4L or V6 3.0L and other vehicles sends fuel from the tank to the engine. This in-tank module pairs a turbine pump with the sending unit that reads fuel level for the gauge.
A failing fuel pump module can show up as hard starting, sputtering or lost power under load, or a fuel gauge that reads wrong. Before replacing it, look at the fuel pump fuse with the ignition off for a blown element; a fuel pressure test means connecting a gauge to the fuel system, so leave that to a shop.
The vehicles it fits include the 2001 Chrysler Sebring 4-cylinder 2.4L or V6 3.0L and the 2000-2001 Mitsubishi Eclipse 4-cylinder 2.4L or V6 3.0L, and it is a direct-fit replacement for each of them. The 2001 Dodge Stratus 4-cylinder 2.4L or V6 3.0L takes one module, and this listing is one.
Fit and size
Build and materials
One fuel pump module with its fuel filter, strainer and gasket or seal. The wire harness, mounting hardware, fuel pressure regulator and fuel tank pressure sensor are not included; old mounting hardware may not be reusable, so plan on new pieces.
Interchange: 402-P7151M
E7151M · 67981 · 67986 · P76519M · FG1124 · P624M · SP7038M · USEP7151M
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Will the Autobest F3162A fit a 2001 Dodge Stratus 4-cylinder 2.4L or V6 3.0L?
Yes. The Autobest F3162A fits the 2001 Dodge Stratus 4-cylinder 2.4L or V6 3.0L; if you drive another car, look up your year, model and engine in the "Vehicles it fits" section.
Does this Autobest fuel pump assembly come with a fuel filter and sending unit?
Yes. The Autobest F3162A module comes with the fuel sending unit, fuel filter, strainer and gasket or seal; the wire harness and mounting hardware are not included.
What pressure and flow does the F3162A turbine pump deliver?
The turbine pump in this fuel pump module is rated at 80 to 90 PSI with an average flow of 33.02 GPH, and it draws an average of 6.3 A at 12V.
How can I tell if the sending unit in this fuel pump module is going bad?
A fuel gauge that reads wrong or sticks at one level can mean a worn sending unit. The new unit reads 111 ohms empty and 4 ohms full, and a shop can test the old one against those values.
Does this in-tank fuel pump module tolerate ethanol in today's fuel?
Yes. This fuel pump module is built for ethanol tolerance in today's fuel systems, and each pump is tested throughout manufacturing.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.