Autobest Fuel Pump Module Assembly P/N:F4493A
Autobest F4427A fuel pump module for the 2001-2006 BMW 325Ci 6-cylinder 2.5L and other vehicles moves fuel from the tank to the engine. This fuel pump assembly mounts in the tank and includes the fuel sending unit.
Hard starting, stalling or a fuel gauge that reads wrong can mean the module is wearing out. A blown fuel pump fuse, a bad relay, a clogged fuel filter or a wiring fault can show up the same way, so find the cause before you buy a new module.
The 2001-2006 BMW 325Ci 6-cylinder 2.5L, the 2001-2006 BMW 325i 6-cylinder 2.5L and the 2001-2006 BMW 330Ci 6-cylinder 3.0L are among the vehicles it fits, along with more BMW models. Open the "Vehicles it fits" section to check your exact model and engine.
Fit and size
Build and materials
One fuel pump module with the fuel sending unit and strainer. The fuel filter, fuel tank pressure sensor, regulator, gasket or seal and mounting hardware are not included, so plan on new hardware, since the old pieces may not be reusable. This listing is one module, and the car takes one.
Interchange: 16-14-1-184-276 · 16-14-6-752-499 · 16-14-6-766-942 · 152-0992 · 515-2020
E8416M · 67896 · 69497 · P76300M · FG0415 · EH416M · P3071 · PN3046 · SP5008M · 150246 · USEP8416M
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is the Autobest F4427A a fit for a 2001-2006 BMW 325i 6-cylinder 2.5L?
Yes. The Autobest F4427A fuel pump module fits the 2001-2006 BMW 325i 6-cylinder 2.5L. For another BMW model or engine, open the "Vehicles it fits" section.
Does this fuel pump module come with the fuel sending unit and strainer?
Yes, it includes the fuel sending unit and an internal strainer. The fuel filter, regulator, fuel tank pressure sensor, gasket or seal and mounting hardware are not included.
What flow and pressure does the Autobest F4427A turbine pump deliver?
The Autobest F4427A has an average flow rating of 30.38 GPH and a pump pressure of 79.8 to 123.4 PSI. It runs on 12V with an average current draw of 9 A.
What are the sending unit resistance values on this fuel pump module?
The fuel sending unit reads 70 ohms when the tank is empty and 394 ohms when it is full.
Does this fuel pump module have ethanol tolerance?
Yes. This module is made with ethanol tolerance for today's fuel systems, and it is a turbine-type pump that mounts in the tank.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.