Autobest Fuel Pump Module Assembly P/N:F2550A
Autobest F4494A fuel pump module for the 2002-2004 Isuzu Rodeo V6 3.2L, the 2004 Rodeo V6 3.5L and other vehicles draws fuel from the tank and sends it to the engine. The in-tank turbine pump, fuel sending unit and fuel tank pressure sensor come together in one module.
A worn fuel pump assembly can show up as hard starting, stalling or a loss of power under load. Before you replace the module, rule out a blown fuse, a bad relay or damaged wiring, which can also keep a pump from running. This listing is one module, and the car takes one, sitting in the fuel tank.
It also fits the 2002-2003 Isuzu Axiom V6 3.5L and the 2002 Honda Passport V6 3.2L, with a single module in the tank of each.
Fit and size
Build and materials
One fuel pump module with its wire harness, fuel sending unit, fuel tank pressure sensor, strainer and gasket or seal. The fuel filter, regulator and mounting hardware are not included, so plan on new fasteners instead of reusing the old ones.
Interchange: 953-3077 · 8-25336-451-1 · 8-25341-208-0 · 8-98032-171-0
E8483M · 67927 · P76432M · FG0289 · P3100 · SP8027M · 150305 · USEP8483M · TU314
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does the Autobest F4494A fit the 2004 Isuzu Rodeo V6 3.5L?
Yes. The Autobest F4494A fuel pump module fits the 2004 Isuzu Rodeo V6 3.5L, and it also fits the 2002-2004 Rodeo V6 3.2L.
Is a fuel filter included with this Autobest fuel pump module?
No. The Autobest F4494A comes with the pump and module, wire harness, sending unit, pressure sensor, strainer and gasket or seal. The fuel filter, regulator and mounting hardware are not included.
What pressure and flow does this turbine fuel pump module deliver?
The turbine pump is rated for a minimum of 87 PSI and a maximum of 145 PSI, with an average flow rating of 41 GPH on 12V.
What are the fuel sending unit resistance values on this module?
The built-in fuel sending unit is listed at 40 ohms when the tank is empty and 250 ohms when full. A shop can check the fuel gauge circuit against these values.
How can I tell if the pump in my fuel tank is weakening?
A whine from the tank, hesitation or sputtering can mean the pump is weakening. Testing fuel pressure involves the fuel line, so a shop should do it.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.