Autobest Fuel Pump Module Assembly P/N:F1556A
Autobest F4793A fuel pump module for the 2006-2010 Kia Optima 4-cylinder 2.4L and other vehicles sends fuel from the tank to the engine. The in-tank module also carries the fuel sending unit that reports the fuel level to the gauge.
A worn fuel pump module can show up as hard starting, sputtering or power loss under load, or a fuel gauge that reads wrong. A failing fuel pump relay, a blown fuse or a damaged wiring connector can be behind these signs too, so track down the cause before you order.
It fits the 2006-2010 Kia Optima 4-cylinder 2.4L and the 2007-2010 Kia Magentis 4-cylinder 2.4L, and is a direct-fit replacement for both.
Fit and size
Build and materials
One fuel pump module with the fuel filter, strainer, fuel sending unit, fuel tank pressure sensor, pressure regulator and gasket or seal. This listing holds one module, and both cars take one. The wiring harness and mounting hardware are not included, so plan on new mounting hardware, as the old pieces may not be reusable.
Interchange: 31110-2G100
E8782M · P76430M · FG1579 · SP3023M · SP3054M · USEP8782M
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does the Autobest F4793A fit the 2006-2010 Kia Optima 4-cylinder 2.4L?
Yes. The Autobest F4793A fuel pump module is a direct-fit replacement for the 2006-2010 Kia Optima 4-cylinder 2.4L and the 2007-2010 Kia Magentis 4-cylinder 2.4L.
Does this fuel pump assembly come with the fuel filter and sending unit?
Yes. This fuel pump module includes the fuel filter, strainer, fuel sending unit, fuel tank pressure sensor, pressure regulator and gasket or seal; the wiring harness and mounting hardware are not included.
What flow and pressure does the F4793A fuel pump module put out?
The Autobest F4793A turbine pump has an average flow rating of 31.7 GPH and a pump pressure of 50 PSI, and it runs on 12V with an average current draw of 7.5 A.
How can I tell if the sending unit on this fuel pump module is failing?
A fuel gauge that sticks on full, sticks on empty or jumps around can mean a faulty sending unit. A shop can test it against this module's rating of 8 ohms empty and 200 ohms full.
Does this fuel pump module replace part number 31110-2G100?
Yes. Part number 31110-2G100 is one of the interchange numbers this fuel pump module replaces, along with others such as E8782M and SP3023M.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.