Autobest Fuel Pump Module Assembly P/N:F6131A
Autobest F4825A fuel pump module for the 2007-2010 BMW X5 6-cylinder 3.0L moves fuel from the tank to the engine. Also called a fuel pump assembly, it sits in the tank and pairs the pump with a fuel filter and a fuel sending unit.
Hard starting, stalling or an erratic fuel gauge can mean the pump or sending unit is wearing out. Before you replace the module, rule out a blown fuse, a failed relay or damaged wiring, which can also interrupt fuel delivery. One module goes in the fuel tank.
It fits the 2007-2010 BMW X5 6-cylinder 3.0L.
Fit and size
Build and materials
One fuel pump module with a fuel filter, fuel sending unit, strainer and gasket or seal. The wire harness, mounting hardware, regulator and fuel tank pressure sensor are not included, so plan on new hardware rather than reusing the old.
Interchange: 16-11-7-195-463
E8814M · P77219M · FG1176 · SP5113M · USEP8814M
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does the Autobest F4825A fuel pump module fit the 2007-2010 BMW X5 6-cylinder 3.0L?
Yes. The Autobest F4825A is listed for the 2007-2010 BMW X5 6-cylinder 3.0L, and that engine takes one module.
Does the Autobest F4825A come with a fuel filter and fuel sending unit?
Yes. The Autobest F4825A includes a fuel filter, fuel sending unit, strainer and gasket or seal. The wire harness, mounting hardware, regulator and fuel tank pressure sensor are not included.
What flow rate and pressure does this turbine fuel pump module have?
This turbine pump has an average flow rating of 51.5 GPH and a minimum pump pressure of 87 PSI. It runs on 12V with an average current draw of 11 A.
How can I tell if the fuel sending unit in this module is failing?
A fuel gauge that reads wrong or sticks can mean the sending unit is worn. This unit reads 992 ohms empty and 51 ohms full, and a shop can test it against those values.
What is the housing and seal on this fuel pump module made of?
The housing is POM and the gasket or seal is NBR. The pump is a turbine type with an internal strainer.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.