Dorman - OE Solutions Automatic Transmission Oil Cooler Hose Assembly P/N:624-488
Dorman 624-971 lower auto trans oil cooler hose assembly for the 2005-2009 Buick LaCrosse V6 3.8L and other vehicles carries transmission fluid to and from the radiator oil cooler. It is a direct replacement for an original hose assembly that leaks or has failed from corrosion, collision, vibration or fitting damage.
Fluid dripping from the hose assembly, wet or corroded fittings, or low transmission fluid can mean the assembly is damaged. Before you replace it, rule out a leak at the radiator oil cooler or at another connection, since fluid from there can run down onto the hose assembly. A vehicle needs one assembly for the lower radiator oil cooler inlet and outlet.
The vehicles it fits include the 2004-2005 Chevrolet Impala V6 3.4L or 3.8L and the 2005-2009 Buick Allure V6 3.8L, as well as the LaCrosse above. Open the "Vehicles it fits" section to check your exact model and engine.
Fit and size
Build and materials
One auto trans oil cooler hose assembly. A gasket or seal is not included.
Interchange: 10324198 · 10332502 · 15233081 · 15264588 · 21998146 · 5801074
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does the Dorman 624-971 fit a 2005-2009 Buick LaCrosse V6 3.8L?
Yes, Dorman 624-971 is listed for the 2005-2009 Buick LaCrosse V6 3.8L; for another car, open the "Vehicles it fits" section and check your exact model and engine.
Is a gasket or seal included with this auto trans oil cooler hose assembly?
No. The package holds one hose assembly only, and a gasket or seal is not included.
What kind of connections does the Dorman 624-971 have?
Dorman 624-971 has quick disconnect fittings on both ends. The flexible rubber and metal assembly is 30 inches long.
What pressure and temperature can this oil cooler hose assembly handle?
Its maximum working pressure is 100 psi, and its operating temperature range runs from -40°F to 329°F.
How can I tell if this oil cooler hose assembly is leaking?
With the engine off and cool, look for transmission fluid drips, wet spots or corrosion along the hose assembly and at its quick disconnect ends. A shop can test it if the source is unclear.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.