Baldwin Cooling System Filter P/N:BW5075
Baldwin Filters
Baldwin BW5082 cooling system filter for the 2008-2016 IC Corporation HC Integrated Commercial 6-cylinder 7.6L and other vehicles and equipment filters the coolant in the cooling system. It is a spin-on filter, so it threads onto a base.
A coolant filter is serviced as part of routine cooling system maintenance. Leaks around the filter, or rust and debris in the coolant, can point to a filter that needs attention. With the engine off and cool, look over the filter, its base and the nearby hoses for the source of a leak before you replace anything.
The fitment includes the 2006-2015 IC Corporation 1300 FBC 6-cylinder 7.6L and the 2008-2011 IC Corporation FE Commercial 6-cylinder 7.6L, along with many International and AGCO models. Open the "Vehicles it fits" section to check your exact model and engine.
Fit and size
Build and materials
This listing is one cooling system filter, and each of these vehicles and equipment takes one.
Interchange: 1819109-C1 · International 1822313-C1
72509523 · 96206 · 89206 · P552106 · WF2106 · WFR82106 · PR3907 · 2NUF7 · WC12 · C8R · 4206 · W55072 · 24206
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does the Baldwin BW5082 cooling system filter fit the 2008-2016 IC Corporation HC Integrated Commercial 6-cylinder 7.6L?
Yes. Baldwin BW5082 fits the 2008-2016 IC Corporation HC Integrated Commercial 6-cylinder 7.6L. For another model or engine, open the "Vehicles it fits" section and check there.
Which filter base works with the Baldwin BW5082?
Baldwin BW5082 can be used with the CFB5000 base or the CFB8784 dual base.
What size of cooling system is this coolant filter meant for?
This spin-on coolant filter is a maintenance filter for cooling systems with 7-16 gallons capacity, and it carries the BTA PLUS formula.
What can show that a spin-on coolant filter needs attention?
A leak around the filter, or rust and debris in the coolant seen with the engine off and cool, can mean it needs attention. A shop can test the cooling system.
What thread and size is the Baldwin BW5082?
Baldwin BW5082 has an 11/16 thread at 16 per inch, a 3 11/16 in (93.7 mm) outer diameter and a 5 3/8 in (136.5 mm) height.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.