Beck/Arnley Direct Ignition Coil P/N:178-8609
Beck/Arnley 178-8547 direct ignition coil for the 2011-2013 Subaru Forester H4 2.5L and other vehicles steps battery voltage up to the high voltage a spark plug needs to fire.
A failing coil can show up as a misfire, a rough idle or a lit check engine light. Before you replace a coil, rule out a worn spark plug or a damaged connector, since a misfire can start in more than one place.
This coil is application specific and matches OE form, fit and function for the 2011-2013 Subaru Forester H4 2.5L and the 2012 Subaru Impreza H4 2.0L. The Forester takes four coils, and so does the Impreza; this listing is one coil.
Interchange: 5C1478 · E1164 · UF664 · 22433AA630 · C1479
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is the Beck/Arnley direct ignition coil right for the 2011-2013 Subaru Forester H4 2.5L?
Yes. Beck/Arnley 178-8547 is application specific for the 2011-2013 Subaru Forester H4 2.5L, which takes four coils.
Will this coil work in the 2012 Subaru Impreza H4 2.0L?
Yes. Beck/Arnley 178-8547 is listed for the 2012 Subaru Impreza H4 2.0L, and that engine also takes four coils.
What are the windings in this direct ignition coil made of?
Both the primary and secondary windings are made from copper.
Could a misfire mean this direct ignition coil is failing?
Yes, a misfire is one sign a coil is failing, along with a rough idle or a lit check engine light.
Is Beck/Arnley 178-8547 ready to install out of the box?
Yes. Beck/Arnley 178-8547 goes straight onto the vehicle out of the box for easy installation.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.