The Beck/Arnley 085-6749 rear disc brake pad and hardware kit for the 2007-2010 Ford Edge and other vehicles presses against the rear brake rotors to slow the wheels. It is designed as a direct replacement for the original equipment pads.
- Meets Beck/Arnley requirements and specifications, with attention to form, fit and function
- Uses the same pad material type that was on the vehicle originally
- Precision-cut edges for a proper fit
- Bonded shims help reduce braking noise
- Application-specific for these vehicles
Squealing or grinding from the rear when you brake, longer stops, or friction material worn thin can mean these rear pads are worn out. When the wheels are off for the brake job, look the rotors over for deep grooves, cracks or a lip at the edge. A worn rotor or a sticking caliper can also bring on noise and may need attention of its own.
It is also a direct replacement for the rear brake pads on the 2007-2015 Mazda CX-9 and the 2007-2012 Mazda CX-7.
Specifications
- Position: Rear
- Friction material: Ceramic
- Shims: Integrally molded
In the box: rear disc brake pads with hardware.
Installation notes:
- The pads are post-cured, so no break-in is needed.
Interchange: 14D1259CH · AT1259 · ACT1259 · D1158B · AXCD1259 · D1259 · 10512590 · L2Y62648Z · L2Y72643Z · L2Y72648ZA · L2Y82643ZA · PGD1259C · ZD1259
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
14D1259CH, AT1259, ACT1259, D1158B, AXCD1259, D1259, 10512590, L2Y62648Z, L2Y72643Z, L2Y72648ZA, L2Y82643ZA, PGD1259C, ZD1259
Frequently Asked Questions
Are these 2007-2010 Ford Edge brake pads for the front or the rear?
They are rear pads. Beck/Arnley 085-6749 is a rear disc brake pad and hardware kit for the 2007-2010 Ford Edge.
Will these rear disc brake pads also fit a 2007-2015 Mazda CX-9?
Yes. Beck/Arnley 085-6749 fits the rear axle of the 2007-2015 Mazda CX-9 as well as the 2007-2010 Ford Edge.
Does this Beck/Arnley kit come with hardware for the rear pads?
Yes. This rear disc brake pad and hardware kit includes the pads with their hardware, and the pads come integrally molded with shims.
What friction material do these rear disc brake pads use?
These rear pads use a ceramic friction material, made with the same pad material type that was on the vehicle originally.
Is a break-in period needed for the Beck/Arnley brake pad?
No. These rear disc brake pads come post-cured, which removes the need for a break-in period.
