Beck/Arnley Engine Coolant Thermostat P/N:143-0972
Beck/Arnley 143-0684 thermostat for the 1982-1983 Nissan Sentra 4-cylinder 1.5L, the 1983-1987 Sentra 4-cylinder 1.7L, the 1984-1988 Sentra 4-cylinder 1.6L and other vehicles regulates coolant flow so the engine reaches and holds its operating temperature. Also called an engine coolant thermostat, this Beck/Arnley thermostat is application specific.
An engine that runs hotter than normal, warms up slowly or shows coolant seepage at the housing can mean the thermostat is sticking. Before you buy, look over the housing and hoses for wet spots with the engine off and cool, since a hose or fan fault can look similar.
The 1987 Nissan Pathfinder 4-cylinder 2.4L and the 1982-1984 Nissan Maxima 6-cylinder 2.4L both take this thermostat, one per vehicle. It is also a thermostat replacement for the Sentra runs named above and many other vehicles, and it matches OE form, fit and function. Driving something else? Run your year, model and engine through the "Vehicles it fits" section.
Interchange: 21200F3160 · 11638001672 · 21200P790171 · 8943360690 · 241160 · 13356
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this Nissan Maxima thermostat the right one for the 1982-1984 Maxima 6-cylinder 2.4L?
Yes. Beck/Arnley 143-0684 is listed for the 1982-1984 Nissan Maxima 6-cylinder 2.4L, and that car takes one thermostat.
Will a Nissan Pathfinder thermostat from this listing fit a 1987 Pathfinder 4-cylinder 2.4L?
Yes. Beck/Arnley 143-0684 is listed for the 1987 Nissan Pathfinder 4-cylinder 2.4L. For a different car, check its year, model and engine in the "Vehicles it fits" section.
Does Beck/Arnley 143-0684 replace number 21200F3160?
Yes. 21200F3160 is one of the numbers this thermostat replaces, along with 11638001672 and 21200P790171. The full cross-reference is on the Interchange line.
What can a failing Beck/Arnley thermostat look like on a car that overheats?
Overheating, slow warm-up or coolant seepage near the housing can mean a thermostat is sticking or leaking. A shop can test it, since a proper test needs the engine running.
Is this thermostat made to match the original part?
Yes. Its form, fit and function match OE, and it is application specific, so it is made for the engines in its fitment.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.