Beck/Arnley Engine Mount P/N:104-2313
Beck/Arnley 104-0617 front right engine mount for the 1990-1993 Volvo 240 4-cylinder 2.3L and other vehicles helps support and locate the engine and isolate vibration. It is designed as a direct replacement for the original-equipment mount, with attention to form, fit and function.
A worn engine mount can show up as a clunk when accelerating, decelerating or shifting, vibration at idle, or cracked or separated rubber. Before you replace this mount, rule out a worn transmission mount or loose fasteners, which can produce similar movement and noise. This listing is one mount for the front right; the other side is its own part, and both sides are normally replaced together. The front right position takes one mount.
The 1990-1993 Volvo 240 4-cylinder 2.3L, the 1976-1983 Volvo 245 4-cylinder 2.1L and the 1983-1989 245 4-cylinder 2.3L are among the cars this mount fits, and it fits more. If your Volvo is not named here, look up its year and engine in the "Vehicles it fits" section.
Interchange: 1032801 · 2429 · 312429 · A2429 · 274111 · 602429 · 1272676 · 1330177 · EM2429
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this the right Volvo 240 engine mount for a 1990-1993 4-cylinder 2.3L?
Yes. Beck/Arnley 104-0617 is the front right engine mount for the 1990-1993 Volvo 240 4-cylinder 2.3L. For another Volvo, search its year and engine in the "Vehicles it fits" section.
Which position does this Beck/Arnley engine mount cover?
This mount is for the front right position. The other side is a separate part, so this listing is one mount only.
Is the mount type on Beck/Arnley 104-0617 the same as the original?
Yes. The mount type is an exact match to OE, which can be hydraulic, vacuum, active or another type, depending on the application.
Does the number 2429 interchange with this engine mount?
Yes. 2429 is listed as an interchange number for Beck/Arnley 104-0617, along with A2429 and EM2429.
How can I tell if the front right engine mount is going bad?
With the engine off and cool, look for cracked or separated rubber. Clunks when accelerating or shifting and vibration at idle can also mean a worn mount, though other causes are possible.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.