Beck/Arnley 178-8226 ignition coil for the 1994-1997 Honda Accord 4-cylinder 2.2L, the 1998-2002 Accord 4-cylinder 2.3L and other vehicles turns battery voltage into the high-voltage spark that fires the spark plug.
- Delivers high voltage output
- Primary and secondary windings made from copper
- Resistor supplied if the application calls for one
- Ready to install straight out of the box
Quick facts
- Part: Beck/Arnley 178-8226 ignition coil
- Fits: the 1994-1997 Honda Accord 4-cylinder 2.2L, the 1998-2002 Accord 4-cylinder 2.3L and other vehicles
- Condition: New
A coil that is wearing out can show up as a misfire, a rough idle or hard starting. Worn spark plugs, a wiring fault or a fuel delivery problem can be behind a misfire too, so pin down the cause before you buy a coil.
Fits
Matching OE form, fit and function, this is also an ignition coil for the 1996-1997 Honda Civic 4-cylinder 1.6L and for the 1995-1997 Honda Odyssey 4-cylinder 2.2L. The 1994-1997 Honda Accord 4-cylinder 2.2L takes one. If your car is not named here, look up its year and engine in the "Vehicles it fits" section.
Specifications
- Quantity per vehicle: 1
- Windings: copper primary and secondary
- Resistor: supplied if applicable
- Condition: New
Interchange: 5C1080 · E584 · 30500P0AA01 · 30500P0HA01 · 30500PAAA01 · 30500PCA003 · 72921009047 · 5862025830 · 5862061610 · 5862071980 · UF123 · C991
This part cross-references / interchanges with the following part numbers:
5C1080, E584, 30500P0AA01, 30500P0HA01, 30500PAAA01, 30500PCA003, 72921009047, 5862025830, 5862061610, 5862071980, UF123, C991
Frequently Asked Questions
Will Beck/Arnley 178-8226 work as a Honda Accord ignition coil on the 1998-2002 Accord 4-cylinder 2.3L?
Yes. Beck/Arnley 178-8226 fits the 1998-2002 Honda Accord 4-cylinder 2.3L and the 1994-1997 Accord 4-cylinder 2.2L. For any other car, look up your year and engine in the "Vehicles it fits" section.
Is this the coil pack for a 2002 Honda Accord 4-cylinder 2.3L?
Yes. The 2002 Honda Accord 4-cylinder 2.3L falls inside the 1998-2002 run this ignition coil fits, and that engine takes one.
Are the windings in this ignition coil made of copper?
Yes. Both the primary and secondary windings are copper, and the coil is built for high voltage output. A resistor is supplied if the application calls for one.
How can I tell if an ignition coil like this is wearing out?
A misfire, rough idle or hard start can mean a weak coil. With the engine off and cool, you can also look the coil over for cracks or burn marks.
Does Beck/Arnley 178-8226 come ready to install?
Yes. Beck/Arnley 178-8226 goes straight onto the vehicle out of the box, with a resistor supplied if the application needs one.
