Beck/Arnley Ignition Knock (Detonation) Sensor P/N:158-0976
Beck/Arnley 158-1244 ignition knock (detonation) sensor for the 2003-2007 Honda Accord V6 3.0L and other vehicles detects engine knock from its place in the cylinder block. It picks up knock vibration so the engine computer can respond.
A failing knock sensor can show up as a check engine light, engine pinging under load or lower performance, though other faults produce similar symptoms. Before replacing it, look over the sensor connector and wiring with the engine off for damage or corrosion, and leave any running-engine testing to a shop. If this sensor is the cause, this one replaces it.
The 2003-2007 Honda Accord V6 3.0L, the 1999-2010 Honda Odyssey V6 3.5L and the 2003-2008 Honda Pilot V6 3.5L all take this sensor, and so do more models. The 1999-2010 Honda Odyssey V6 3.5L takes one, and the sensor's form, fit and function match OE. If your car is not named here, open the "Vehicles it fits" section and check your exact model and engine.
Interchange: 2131789 · 30530P8FA01 · 5S2136 · S8685 · 80221024001 · 12582343 · KS102 · SU4780
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does the Beck/Arnley 158-1244 ignition knock (detonation) sensor fit a 1999-2010 Honda Odyssey V6 3.5L?
Yes. Beck/Arnley 158-1244 fits the 1999-2010 Honda Odyssey V6 3.5L, and that engine takes one sensor.
Is this sensor right for the 2003-2008 Honda Pilot V6 3.5L?
Yes. This sensor fits the 2003-2008 Honda Pilot V6 3.5L. For any other model or engine, open the "Vehicles it fits" section.
Are the terminals on this sensor corrosion resistant?
Yes. Beck/Arnley 158-1244 has corrosion-resistant terminals and coatings, and the sensor mounts in the cylinder block.
What signs can point to a worn ignition knock (detonation) sensor?
A check engine light, pinging under load or reduced performance can be signs the sensor is failing. A shop can read the stored codes to confirm.
Is 30530P8FA01 an interchange number for this sensor?
Yes. 30530P8FA01 is listed as an interchange number for Beck/Arnley 158-1244, along with KS102 and SU4780 among others.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.