Beck/Arnley 201-1742 ignition lock for the 1995-1999 Nissan Sentra 4-cylinder 1.6L, the 1998-1999 Sentra 4-cylinder 2.0L and other vehicles takes your key and turns to start the engine. This ignition lock assembly is a key and tumbler unit made for the application it fits.
- Comes with two keys
- Pre-lubricated internally for smooth operation
- Application-specific design
Quick facts
- Part: Beck/Arnley 201-1742 ignition lock
- Also called: ignition lock assembly
- Fits: 1995-1999 Nissan Sentra 4-cylinder 1.6L, the 1998-1999 Sentra 4-cylinder 2.0L and other vehicles
- Condition: New
A key that is hard to insert, sticks or will not turn can mean the lock is worn. Before you replace it, rule out a worn key or the ignition switch behind the lock, since either can cause similar trouble. One lock goes in each ignition, so one is all the car needs.
Fits
It is listed for a wide range of Nissan and Infiniti models, led by the 1995-1999 Nissan Maxima V6 3.0L and the 1995-1998 Nissan 200SX 4-cylinder 1.6L or 2.0L. It matches OE form, fit and function. Open the "Vehicles it fits" section to check your exact model and engine.
Specifications
- Quantity per vehicle: 1
- Construction: key and tumbler
- Internal lubrication: pre-lubricated
- Condition: New
- Country of origin: Taiwan
In the box
One ignition lock, supplied with its keys.
Interchange: E1468E · 1S6046 · CS870 · D870040U11 · IG8270 · US530 · LS1191
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
E1468E, 1S6046, CS870, D870040U11, IG8270, US530, LS1191
Frequently Asked Questions
Is Beck/Arnley 201-1742 the right Nissan Sentra ignition lock for 1998-1999 cars with the 4-cylinder 2.0L?
Yes. Beck/Arnley 201-1742 is listed for the 1998-1999 Nissan Sentra 4-cylinder 2.0L, and also for the 1995-1999 Sentra 4-cylinder 1.6L.
Does the Beck/Arnley 201-1742 ignition lock come with keys?
Yes. Beck/Arnley 201-1742 comes with two keys, and this listing is for a single ignition lock.
Is the tumbler in this ignition lock lubricated?
Yes. The tumbler is pre-lubricated internally for smooth operation.
How can I tell if my ignition lock is wearing out?
A key that is hard to insert, sticks or will not turn can mean the lock is wearing. Look the key over for wear as well, and have a shop test the rest.
Is 201-1742 a cross-reference for number CS870?
Yes. CS870 is on the Interchange list for this ignition lock, along with several other numbers from other brands.
