Restore tight, responsive steering with the Beck/Arnley Steering Tie Rod End Kit, MPN 101-7732. This inner tie rod end with boot kit drops in as an application-specific replacement for the 2005-2010 Honda Odyssey — see the Buyer's Guide tab for full engine details. The inner tie rod end links the steering rack to the outer tie rod, transmitting rack motion to the steering knuckle so your front wheels turn together and track straight.
Signs this part may need replacing include loose or wandering steering, a clunk or knock when turning, uneven front tire wear, or a torn boot. If a worn inner tie rod end is the cause, this kit replaces it. Application specific for this vehicle.
Interchange: 53010SHJA02 · 53534SHJA02
This part cross-references / interchanges with the following part numbers:
What vehicle does this tie rod end kit fit?
It is an application-specific replacement for the 2005-2010 Honda Odyssey. Check the Buyer's Guide tab to confirm the exact fit for your vehicle.
Is this an inner or outer tie rod end?
This is an inner tie rod end with boot kit. The inner tie rod end connects the steering rack to the outer tie rod.
Does the kit include the boot and hardware?
Yes. The required steering rack boot is included in the kit, along with the mounting hardware. The unit also arrives pre-greased.
What are the signs my inner tie rod end may need replacing?
Look for loose or wandering steering, a clunk when turning, uneven front tire wear, or a torn boot. Have the cause diagnosed before replacing.
What numbers does this part interchange with?
It interchanges with 53010SHJA02 and 53534SHJA02.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
