Beck/Arnley 101-5606 front inner tie rod end for the 2004-2008 Suzuki Forenza and other vehicles passes steering movement from the steering linkage on to the wheel.
- Coated or plated for corrosion protection
- Full ball stud
- Pre-greased ball joint
- Easy-access wrench flat that takes a socket for installation and removal
Quick facts
- Part: Beck/Arnley 101-5606 tie rod end
- Also called: steering tie rod end
- Fits: 2004-2008 Suzuki Forenza and other vehicles
- Position: Front inner
- Condition: New
Loose or wandering steering, a clunk over bumps or uneven tire wear can mean a steering tie rod end is worn, though a worn ball joint or wheel bearing can be behind them, so find the cause before replacing it. Tie rod ends are normally replaced as a pair, and this listing is one.
Fits
This part matches OE form, fit and function on the 2004-2008 Suzuki Forenza, the 2005-2008 Suzuki Reno and the 2004-2007 Chevrolet Optra, and each of them takes two.
Specifications
Fit and size
- Position: front inner
- Quantity per vehicle: 2
- End 1 fitting gender: male
Build and materials
- Construction: full ball stud
- Coating: coated or plated for corrosion protection
- Pre-greased: yes; greaseable: no
- Condition: new
- Country of origin: Taiwan
In the box
One tie rod end. A grease fitting, dust boot, locking nut, castle nut, cotter pin and adjusting sleeve are not included, so plan on new nuts and a new cotter pin rather than reusing the old ones.
Interchange: 61248009 · TI55070XL · TI55070 · ES4585 · MS80713 · 4850085Z23 · JAR1211
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Frequently Asked Questions
Does the Beck/Arnley 101-5606 fit the 2004-2008 Suzuki Forenza?
Yes. Beck/Arnley 101-5606 is a front inner tie rod end for the 2004-2008 Suzuki Forenza, and it also fits the 2005-2008 Suzuki Reno and the 2004-2007 Chevrolet Optra.
Is this Beck/Arnley tie rod end pre-greased?
Yes. The ball joint comes pre-greased. This tie rod end is not greaseable, and no grease fitting is included.
Do the nuts and cotter pin come with the 101-5606 tie rod end?
No. Beck/Arnley 101-5606 comes without a locking nut, castle nut, cotter pin, dust boot or adjusting sleeve, so get those separately.
How can I tell if a front inner tie rod end is worn?
Play in the steering, a clunk over bumps or uneven tire wear can point to wear. A shop can confirm it with the wheel off the ground.
Can I use a socket on this tie rod end?
Yes. The easy-access wrench flat is made for a socket, which helps when installing or removing this tie rod end.
Reviews
No reviews yet — be the first to review this product.
Write a ReviewWrite a Review