Beck/Arnley Steering Tie Rod End P/N:101-5091
Tighten up loose steering with the Beck/Arnley tie rod end (P/N 101-6039), a front inner steering tie rod end that drops in as a direct-fit replacement for the 2003-2004 Nissan Murano. It connects the steering linkage to the wheel so your steering input is transferred to the front wheels.
Worn tie rod ends can show up as loose or wandering steering, a clunk from the front end, or uneven front tire wear. If a failed inner tie rod end is the cause, this replaces it — diagnose the steering and suspension first, since these signs can have other causes. An alignment is recommended after installation.
Interchange: 61242032 · 48521CA025 · NIA610 · TI69000PR · TI69000 · EV80625 · ES4283 · MEV80625 · JAR1174
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Will this Beck/Arnley steering tie rod end fit my vehicle?
It is a direct-fit replacement for the 2003-2004 Nissan Murano. Check the "Vehicles it fits" section to confirm it matches your vehicle.
Is this an inner or outer tie rod end?
This is a front inner steering tie rod end for the listed application.
Does the ball joint come greased?
Yes. The ball joint is pre-greased and uses a full ball stud for smooth movement.
What are signs my tie rod end may need replacing?
Loose or wandering steering, a clunk from the front end, or uneven front tire wear. Have the steering and suspension diagnosed, as these signs can have other causes.
Do I need an alignment after installing it?
An alignment is recommended after replacing a tie rod end to set correct toe and help prevent uneven tire wear.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.