Beck/Arnley Steering Tie Rod End P/N:101-8627
Tighten up loose, wandering steering with the Beck/Arnley tie rod end (P/N 101-7712), the front right outer tie rod end that connects the steering linkage to the steering knuckle and transmits steering input to the wheel. It drops in as a direct replacement for the 2010-2011 Honda Accord Crosstour and the 2012-2015 Honda Crosstour — see the "Vehicles it fits" section for engine-level details.
Matches OE form, fit and function: engineered as a direct replacement for the listed foreign-nameplate applications, so it installs like the original.
Corrosion protection: coated or plated to resist corrosion.
Pre-greased ball joint: the ball joint comes pre-greased, and a full ball stud carries the steering load.
Easy installation: an easy-access wrench flat lets you use a socket for simple installation and removal.
Signs this front right outer tie rod end may need replacing include loose or wandering steering, uneven or accelerated tire wear, and a clunk or play felt through the steering. If a worn tie rod end is the cause, this replaces it; have the vehicle aligned after installation.
Interchange: 53540TP6A01 · 53540TP6A02 · ES801162 · ES4849E
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
What is this Beck/Arnley steering tie rod end?
It's a front right outer tie rod end (P/N 101-7712) that links the steering linkage to the knuckle, transmitting steering input to the wheel.
Which vehicles does part 101-7712 fit?
It's a direct replacement for the 2010-2011 Honda Accord Crosstour and the 2012-2015 Honda Crosstour. Check the "Vehicles it fits" section for engine-level details.
What are the signs a tie rod end needs replacing?
Loose or wandering steering, uneven or accelerated tire wear, and a clunk or play felt through the steering. Diagnose the cause before replacing.
Is this tie rod end greased and coated?
Yes. The ball joint comes pre-greased and it uses a full ball stud, and the part is coated or plated for corrosion protection.
Do I need an alignment after installing it?
Yes. Have the vehicle aligned after installing a tie rod end so steering angles and tire wear stay correct.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.