Steer with confidence and keep the front wheels tracking true with the Beck/Arnley tie rod end 101-8405 (also written 1018405), a direct-fit front inner tie rod end for the 2016-2022 Honda HR-V. It ties the steering linkage to the rack so steering input is transmitted to the road wheel with minimal play. See the Buyer's Guide tab for full engine details.
A worn tie rod end can cause loose or wandering steering, uneven or excessive tire wear, and knocking when turning. If a failed inner tie rod end is the cause, this replaces it. Tie rod ends often wear as a pair — inspect the opposite side and steering linkage during service.
Interchange: 61240126 · 53010T7A003 · 53010T7W003 · EV801305 · MS60740
This part cross-references / interchanges with the following part numbers:
What vehicle does the Beck/Arnley 101-8405 tie rod end fit?
It is a direct-fit front inner tie rod end for the 2016-2022 Honda HR-V. Check the Buyer's Guide tab to confirm the exact application for your vehicle.
Is this an inner or outer tie rod end?
This is the front inner tie rod end, which connects the steering rack to the outer tie rod end in the steering linkage.
Does the ball joint come greased?
Yes. The ball joint is pre-greased and uses a full ball stud, so it is ready to install out of the box.
What are the signs a tie rod end may need replacing?
Loose or wandering steering, uneven or excessive tire wear, and knocking when turning can be signs. Have the cause diagnosed, since these symptoms can have other sources.
What numbers does this part interchange with?
It cross-references 61240126, 53010T7A003, 53010T7W003, EV801305, and MS60740.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
