Keep the front suspension tight and the steering precise with the Beck/Arnley Suspension Ball Joint 101-4817, a front upper ball joint that drops in as a direct replacement for the 1996-2002 Toyota 4Runner, 2001-2007 Toyota Sequoia, 1995-2004 Toyota Tacoma, and 2000-2006 Toyota Tundra (see the Buyer's Guide tab for engine-level details). The ball joint pivots between the upper control arm and the steering knuckle, letting the front suspension travel while the wheels steer — a job that puts constant load on the joint.
OE-matched: designed to match the original part's form, fit, and function for foreign-nameplate applications.
Corrosion protection: coated or plated to resist corrosion.
Hardware supplied as needed: necessary hardware is provided where required for a complete installation, with hardware functionality matching the original design requirements.
Application specific: built for this vehicle's front upper position.
A worn ball joint can show up as clunking over the front end, loose or wandering steering, and uneven front tire wear. If a failed front upper ball joint is the cause, this replaces it. Have the front suspension inspected to confirm the diagnosis before installing.
It pivots between the upper control arm and the steering knuckle, allowing the front suspension to move up and down while the wheels steer.
What position is this ball joint for?
It is cataloged as a front upper ball joint for the listed Toyota applications.
Which vehicles does it fit?
The 1996-2002 Toyota 4Runner, 2001-2007 Toyota Sequoia, 1995-2004 Toyota Tacoma, and 2000-2006 Toyota Tundra. Check the Buyer's Guide tab for engine details.
What are the signs of a worn ball joint?
Common signs include clunking from the front end, loose or wandering steering, and uneven front tire wear. Have the suspension inspected to confirm the cause.
Is mounting hardware included?
Necessary hardware is supplied as needed for a complete installation, with hardware functionality matching the original design requirements.
Anchor the front lower control arm to the steering knuckle and keep your steering tight with the Beck/Arnley Suspension Ball Joint 101-8074. This front lower ball joint is application-specific and...
Keep your steering tight and your suspension tracking true with the Beck/Arnley Suspension Ball Joint (P/N: 101-5320), a front lower ball joint that connects the lower control arm to the steering...
WARNING:
These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov.
