Beck/Arnley Suspension Ball Joint P/N:101-8705
Designed to link the lower control arm to the steering knuckle so the wheel can steer and the suspension can travel, the Beck/Arnley ball joint 101-5320 is a front lower replacement that matches OE form, fit and function. It fits many vehicles, among them the 2009-2019 Toyota Corolla, 2003-2013 Toyota Matrix and 2003-2010 Pontiac Vibe. See the "Vehicles it fits" section for the full list.
Beck/Arnley's product specialists work with a trusted global sourcing network to supply OE-quality replacements for foreign nameplates. Each part must meet Beck/Arnley's own requirements and specifications, with close attention to form, fit and function.
A worn suspension ball joint may show up as clunking over bumps, loose or wandering steering, or uneven tire wear. These signs can have other causes, so have the front suspension inspected first. If you are planning a 2009-2019 Toyota Corolla ball joint replacement, or the same job on a 2003-2013 Toyota Matrix or 2003-2010 Pontiac Vibe, and the front lower joint is the cause, 101-5320 replaces it. Follow the vehicle service information for torque values and for any alignment check it calls for after installation.
Interchange: 61062017 · 534017 · 37251045534 · 37251051001 · BJ74305 · K500175 · FA2243 · MK80595 · 5051327 · 10480595 · 4333009190 · 4333009670 · 4333029425
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
What does this front lower ball joint do?
It is the front lower pivot that links the control arm to the steering knuckle. It lets the wheel steer and the suspension move up and down on the listed applications.
Is this the 2009-2019 Toyota Corolla ball joint I need?
It is listed for the 2009-2019 Toyota Corolla and also fits the 2003-2013 Toyota Matrix and 2003-2010 Pontiac Vibe. Check the "Vehicles it fits" section to confirm your vehicle.
Can the 101-5320 ball joint be greased?
Yes. Beck/Arnley lists it as greaseable, so it can be lubricated with grease during routine maintenance.
Does it come with hardware?
Yes, Beck/Arnley states that hardware is included. Consult the vehicle service information for the correct torque values and installation steps.
What are signs a ball joint may need replacing?
Common signs include clunking over bumps, loose or wandering steering, and uneven tire wear. These can have other causes, so have the suspension inspected before replacing parts.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.