Keep your steering tight and your front suspension planted with the Beck/Arnley Suspension Ball Joint 101-8338 (also written 1018338). This front lower ball joint is application-specific for the 2017-2021 Honda Civic, connecting the lower control arm to the steering knuckle so the wheel can pivot for steering while the suspension travels through its range of motion.
OE form, fit and function: Built to match the original equipment part so it drops in on the listed application.
Corrosion protection: Coated or plated to resist corrosion.
Hardware as needed: Includes the necessary hardware supplied as needed for a complete installation, with hardware functionality matching the original design requirements.
Application specific: Engineered specifically for this vehicle rather than a universal fit.
Signs this part may need replacing include clunking or knocking from the front suspension over bumps, loose or wandering steering, and uneven tire wear. If a worn ball joint is the cause, this replaces it. Ball joints on an axle wear at a similar rate, so inspect the opposite side and replace as directed by the service procedure. Consult the vehicle service information for the correct fasteners and whether they may be reused.
Interchange: 51220TEAT01 · K500415 · MS60525
This part cross-references / interchanges with the following part numbers:
51220TEAT01, K500415, MS60525
Frequently Asked Questions
What vehicle does this ball joint fit?
It is an application-specific front lower ball joint for the 2017-2021 Honda Civic. Check the Buyer's Guide tab to confirm fitment for your exact vehicle.
What does a suspension ball joint do?
It connects the lower control arm to the steering knuckle, letting the wheel pivot for steering while the suspension moves up and down over the road.
What are signs my ball joint needs replacing?
Common signs include clunking or knocking over bumps, loose or wandering steering, and uneven tire wear. Have the cause diagnosed before replacing parts.
Does it come with mounting hardware?
The necessary hardware is supplied as needed for a complete installation, and its functionality matches the original design requirements. Consult the service information for fastener details.
What numbers does this part interchange with?
It cross-references 51220TEAT01, K500415, and MS60525.
Anchor the front lower control arm to the steering knuckle and keep your steering tight with the Beck/Arnley Suspension Ball Joint 101-8074. This front lower ball joint is application-specific and...
Keep your steering tight and your suspension tracking true with the Beck/Arnley Suspension Ball Joint (P/N: 101-5320), a front lower ball joint that connects the lower control arm to the steering...
WARNING:
These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov.
