Beck/Arnley 102-7574 front right lower control arm for the 2004-2006 Toyota Tundra and other vehicles connects the wheel to the vehicle. This suspension control arm lets the suspension move up and down and matches OE form, fit and function.
- Sold without a ball joint
- Steel, iron, or aluminum construction for durability and rust and corrosion resistance
- New hardware and bushings included where applicable
- Fixed design, not adjustable
- Application-specific design
Quick facts
- Part: Beck/Arnley 102-7574 control arm
- Also called: suspension control arm
- Fits: 2004-2006 Toyota Tundra and other vehicles
- Position: Front right lower
- Material: Steel, iron, or aluminum
- Condition: New
A worn arm or its bushings can show up as a clunk over bumps, uneven tire wear or the vehicle pulling to one side. These signs alone do not prove the arm is at fault; a worn sway bar link, for example, can clunk over bumps too.
Fits
It fits the 2004-2006 Toyota Tundra and is also a control arm for the 2004-2007 Toyota Sequoia.
Specifications
Fit and size
- Position: Front right lower
- Quantity per application: 1
Build and materials
- Material: Steel, iron, or aluminum
- Adjustable: No
- Ball joint: not included
- Condition: New
In the box
One front right lower control arm. This side takes one, and the front left is ordered separately; the two sides are normally replaced together.
Interchange: 62244937 · 521676 · CA74354 · RK640437 · FA3211 · CMS86133 · 5071737 · 4806834040 · W01331753787
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
62244937, 521676, CA74354, RK640437, FA3211, CMS86133, 5071737, 4806834040, W01331753787
Frequently Asked Questions
Is Beck/Arnley 102-7574 the right lower control arm for the 2004-2006 Toyota Tundra?
Yes. Beck/Arnley 102-7574 is the front right lower control arm for the 2004-2006 Toyota Tundra. This listing is one arm; the front left side is a separate part.
Can I use Beck/Arnley 102-7574 on a 2004-2007 Toyota Sequoia?
Yes. Beck/Arnley 102-7574 also fits the 2004-2007 Toyota Sequoia, in the front right lower position.
Does the Beck/Arnley control arm come with a ball joint?
No. This control arm comes without a ball joint, which matches the OE design. New hardware and bushings are included where applicable.
Is this front right lower control arm adjustable?
No. Beck/Arnley 102-7574 is a fixed, non-adjustable design made for the front right lower position only.
What signs can point to a worn lower control arm?
A clunk over bumps, uneven tire wear or the vehicle pulling to one side can mean a worn arm or worn bushings. A shop can inspect the suspension to find out.
