Help keep the front right wheel located as the suspension travels with the Beck/Arnley Control Arm 102-8163, the front right lower forward arm for the 2009-2017 Lexus LS460 and 2008-2016 Lexus LS600H. Beck/Arnley designs it as a direct replacement for the original equipment, with close attention to form, fit and function. That makes it a straightforward choice when LS460 control arms or the matching LS600H arm have worn out.
A suspension control arm links the steering knuckle to the chassis. It lets the wheel move up and down while holding it in position. This arm is application specific for these vehicles. Beck/Arnley's product specialists source it through the brand's global supplier network, and it is built to meet Beck/Arnley's own requirements and specifications.
Signs a control arm may need replacing include clunking over bumps, wandering steering, uneven tire wear, or cracked or torn bushings. If the LS460 lower control arm at the front right forward position is the cause, this arm replaces it. Replacing the arms on both sides at the same time is recommended, and a wheel alignment check after installation is good practice.
Interchange: 2703288362 · 4862050080 · 4862050081 · CMS861066
This part cross-references / interchanges with the following part numbers:
What does an LS460 control arm do?
It connects the steering knuckle to the chassis and lets the wheel move up and down while holding it in position. Part 102-8163 is the front right lower forward arm.
Does the Beck/Arnley control arm come with a ball joint?
No. Part 102-8163 comes without a ball joint, which matches the OE design. If your ball joint also needs replacing, you will need to buy it separately.
Will it replace the control arms on a 2010 Lexus LS460?
Yes. It fits the front right lower forward position on the 2009-2017 Lexus LS460, which includes 2010 models. It also fits the 2008-2016 Lexus LS600H.
What are signs a control arm may need replacing?
Common signs include clunking over bumps, wandering steering, uneven tire wear, and cracked or torn bushings. Diagnose the cause first, because other suspension parts can cause similar symptoms.
Is an alignment needed after installing it?
A wheel alignment check is recommended after replacing a control arm, because the arm helps set the wheel's position. Follow the vehicle service information for torque specs and fasteners.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
