Beck/Arnley Suspension Stabilizer Bar Link P/N:101-8346
$31.99
(You save)
Keep the front stabilizer bar working with the body to limit body roll with the Beck/Arnley Suspension Stabilizer Bar Link 101-8346. It installs as a direct-fit replacement in the front left position for the 2014-2021 BMW I3 and the 2018-2021 BMW I3S (see the Buyer's Guide tab for engine details). The end link ties the stabilizer bar to the suspension so the bar can resist lean during cornering; when a link's ball studs or bushings wear out, you may notice clunking or rattling over bumps and a knocking noise through turns — if a failed link is the cause, this replaces it.
OE form, fit and function: designed to match the original equipment link for foreign-nameplate applications.
Hardware included: comes with the components and hardware needed for a complete installation, matching the original design requirements.
Install-friendly studs: includes features such as a wrench flat, hex head, or hex socket on the studs to make installation and removal easier.
Application specific: built for this vehicle.
This listing covers the front left link; inspect the opposite side and replace it too if it shows similar wear for balanced handling.
Interchange: 2700536677 · 31306862857 · K750851
This part cross-references / interchanges with the following part numbers:
2700536677, 31306862857, K750851
Frequently Asked Questions
What does this stabilizer bar link do?
It connects the front stabilizer (sway) bar to the suspension so the bar can resist body lean during cornering, helping keep the vehicle stable.
Which vehicles does the 101-8346 fit?
It's a direct-fit front left link for the 2014-2021 BMW I3 and the 2018-2021 BMW I3S. Check the Buyer's Guide tab to confirm your vehicle.
What position is this link for?
This link is for the front left position. The opposite side is a separate part, so order accordingly if you need both.
Does it come with hardware?
Yes. It comes with the necessary components and hardware for a complete installation, matching the original design requirements.
What are signs my sway bar link may need replacing?
Clunking or rattling over bumps and a knocking noise through turns can point to a worn link. Diagnose the cause first, since other parts can produce similar noises.
Write a Review
Beck/Arnley
Beck/Arnley Suspension Stabilizer Bar Link P/N:101-8346
Keep body roll in check and your Honda's handling tight with the Beck/Arnley Suspension Stabilizer Bar Link 101-8734 (also written 1018734). This front right end link ties the stabilizer (sway) bar...
Keep your sway bar working with the body and tame excess body roll using the Beck/Arnley Suspension Stabilizer Bar Link 101-8449 (also written 1018449). This stabilizer end link installs in the front...
Keep body roll in check and your sway bar working with the driver as intended with the Beck/Arnley Suspension Stabilizer Bar Link 101-8476. This end link ties the stabilizer (sway) bar to the...
WARNING:
These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov.
