Bosch Fuel Pump and Strainer Set P/N:66119
Bosch 68008 fuel pump strainer for the 1986 Chevrolet S10 V6 2.8L filters fuel before it reaches the pump, so debris stays out. It is a new strainer made for installation inside the fuel tank.
Hard starting, hesitation under load or a whining pump can mean the strainer is restricted. A worn fuel pump, a clogged fuel filter or a faulty pressure regulator can also be behind those signs, so find the cause before you buy.
This strainer fits the 1986 Chevrolet S10 V6 2.8L, which takes one.
Fit and size
Build and materials
One fuel pump strainer. Mounting hardware, gaskets, lock ring, seal ring and fuel sending unit are not included; plan on new fasteners and seals, since the old ones may not be reusable.
Interchange: 25055458
This part cross-references / interchanges with the following part numbers:
Does the Bosch 68008 fit a 1986 Chevrolet S10 with the V6 2.8L?
Yes. Bosch 68008 is listed for the 1986 Chevrolet S10 V6 2.8L, and that vehicle takes one strainer.
Do I get a lock ring or gasket with this fuel pump strainer?
No. This listing is one fuel pump strainer. Lock ring, seal ring, gaskets, mounting hardware and the fuel sending unit are not included.
Is this Bosch fuel pump strainer mounted in the tank or on the fuel line?
The Bosch 68008 is an internal strainer, made for use inside the fuel tank. Its multilayered filter media has 99% efficiency.
Can a clogged fuel pump strainer lead to hard starting or hesitation?
Yes, it can. A restricted strainer limits the fuel reaching the pump, so hard starting or hesitation can result; a shop can test fuel pressure to confirm.
Is 25055458 the same as this strainer?
25055458 is another manufacturer's number that this Bosch 68008 strainer replaces.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.