Bosch 13032 oxygen sensor for the 1980-1992 Jaguar XJS V12 5.3L, the 1993 XJS 6-cylinder 4.0L and other vehicles measures the oxygen in the exhaust so the ECU can keep the air-fuel ratio in range. This Bosch O2 sensor is an upstream unit.
- Air-fuel-ratio feedback to the ECU for stable combustion control, helping reduce emissions
- Reaches operating temperature in under 10 seconds for quick closed-loop control on cold starts
- Metal housing with an integrated heater element and TSP coating to resist vibration, corrosion and contamination
- Withstands exhaust gas temperatures up to 1,880°F
Quick facts
- Part: Bosch 13032 oxygen sensor
- Fits: the 1980-1992 Jaguar XJS V12 5.3L, the 1993 XJS 6-cylinder 4.0L and other vehicles
- Position: Upstream
- Material: Metal housing
- Condition: New
A worn oxygen sensor can show up as a check engine light, rough running or poorer fuel economy. Before you replace this one, rule out an exhaust leak ahead of the sensor and a damaged connector or wiring, since either can feed the ECU a bad reading. This listing is a single sensor, and the 1981-1992 Jaguar XJ12 V12 5.3L takes one.
Fits
This sensor is listed for a wide range of Jaguar models, led by the 1980-1992 Jaguar XJS V12 5.3L, the 1981-1992 Jaguar XJ12 V12 5.3L and the 1986-1987 Jaguar Vanden Plas 6-cylinder 4.2L, the 1988-1989 Vanden Plas 6-cylinder 3.6L and the 1990-1991 Vanden Plas 6-cylinder 4.0L. Not seeing your Jaguar's year and engine here? Look it up in the "Vehicles it fits" section.
Specifications
Fit and size
- Position: Upstream
- Quantity per listing: 1
- Thread size: M18 - 1.5
- Hex size: 22 mm
- Length (sealing surface to end of connector): 19.3 in
Build and materials
- Sensor type: narrow-band, heated
- Housing material: Metal
- Condition: New
- Warranty: Bosch 1-year, unlimited-mileage warranty for non-commercial passenger cars and light trucks
In the box
One oxygen sensor with its wiring harness. A mounting bracket is not included.
Installation notes
- Pre-applied conductive anti-seize on the threads
- Direct-fit connectors for a quick swap
Frequently Asked Questions
Does this Jaguar XJS oxygen sensor fit the 1980-1992 Jaguar XJS V12 5.3L?
Yes. Bosch 13032 is listed for the 1980-1992 Jaguar XJS V12 5.3L and the 1993 XJS 6-cylinder 4.0L. The "Vehicles it fits" section covers other Jaguar years and engines.
Does the Bosch 13032 come with its wiring harness?
Yes. Bosch 13032 includes the wiring harness with the sensor. A mounting bracket is not included.
What thread size and hex size does this oxygen sensor have?
The thread size is M18 - 1.5 and the hex size is 22 mm. Length from the sealing surface to the end of the connector is 19.3 in.
Is this Bosch premium oxygen sensor heated?
Yes. This oxygen sensor is a heated, narrow-band unit with an integrated heater element that reaches operating temperature in under 10 seconds.
Is anti-seize already on the threads of this oxygen sensor?
Yes. The threads have pre-applied conductive anti-seize, and the connectors are direct-fit.
