Bosch Oxygen Sensor P/N:16643
Bosch 15445 left oxygen sensor for the 2001 Infiniti QX4 V6 3.5L measures exhaust oxygen and reports the air-fuel ratio to the ECU. This Bosch O2 sensor is a switching-type, narrow-band heated unit.
A failing oxygen sensor can show up as a check engine light, rougher running or poorer fuel economy. These signs alone do not prove the sensor is at fault, since an exhaust leak near it can give similar readings.
This is an oxygen sensor for the 2001 Infiniti QX4 V6 3.5L. The listing is one sensor for the downstream left position, and that engine takes one in this position.
Fit and size
Build and materials
One oxygen sensor with its wiring harness. A mounting bracket is not included.
Is this the right oxygen sensor for the 2001 Infiniti QX4 V6 3.5L?
Yes. Bosch 15445 is the downstream left oxygen sensor for the 2001 Infiniti QX4 V6 3.5L, and that engine takes one in this position.
Does the Bosch 15445 oxygen sensor include its wiring harness?
Yes, the wiring harness comes with the sensor; a mounting bracket is not included.
What thread size and hex does this downstream left sensor have?
Bosch 15445 has an M18 - 1.5 thread and a 22 mm hex. Its length from the sealing surface to the end of the connector is 47.6 in.
Is this a Bosch premium oxygen sensor with a heater?
Yes. It is a heated narrow-band sensor with an integrated heater element, and it reaches operating temperature in under 10 seconds.
Is anti-seize already on the threads of this oxygen sensor?
Yes. Conductive anti-seize comes pre-applied to the threads, and the connectors plug in directly.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.