Bosch 15580 oxygen sensor for the 2007-2016 Mitsubishi Outlander V6 3.0L and other vehicles reads the oxygen content of the exhaust and sends air-fuel-ratio feedback to the ECU. The ECU uses that signal to help keep combustion stable and emissions down.
- Heated narrow-band switching-type sensor for closed-loop air-fuel control
- Reaches operating temperature in under 10 seconds for quick closed-loop control
- Withstands exhaust temperatures up to 1,880°F
- Metal housing, integrated heater element and TSP coating to resist vibration, corrosion and contamination
Quick facts
- Part: Bosch 15580 oxygen sensor
- Fits: 2007-2016 Mitsubishi Outlander V6 3.0L and other vehicles
- Position: upstream, downstream, upstream right, downstream left, downstream right, downstream rear
- Material: Metal housing
- Condition: New
A worn oxygen sensor can show up as a check engine light, rough running or poorer fuel economy, but other faults cause the same signs. Before replacing it, look over the sensor wiring and connector for damage, with the engine off and cool.
Fits
Listed for many Mitsubishi models, this is an oxygen sensor for the 2004-2012 Mitsubishi Galant 4-cylinder 2.4L as well as the 2006-2012 Mitsubishi Eclipse 4-cylinder 2.4L. If your car is not one of these, open the "Vehicles it fits" section and look up your own model and engine.
Specifications
Fit and size
- Position: upstream, downstream, upstream right, downstream left, downstream right, downstream rear
- Thread size: M18 - 1.5
- Hex size: 22 mm
- Length (sealing surface to end of connector): 28 in
Build and materials
- Sensor type: narrow-band, heated
- Housing material: metal
- Wiring harness: included
- Condition: new
- Warranty: Bosch 1-year, unlimited-mileage warranty for non-commercial passenger cars and light trucks
In the box
One oxygen sensor with its wiring harness; the 2007-2016 Mitsubishi Outlander V6 3.0L takes one. A mounting bracket is not included, and an old bracket may not be reusable.
Installation notes
- Conductive anti-seize is pre-applied to the threads.
- Direct-fit connectors are made for quick installation.
Frequently Asked Questions
Is Bosch 15580 a Mitsubishi Outlander oxygen sensor for 2007-2016 models with the V6 3.0L?
Yes. Bosch 15580 is listed for the 2007-2016 Mitsubishi Outlander V6 3.0L. The "Vehicles it fits" section shows the other Mitsubishi models and engines it is listed for.
Will this Mitsubishi Eclipse oxygen sensor fit a 2006-2012 Eclipse with the 4-cylinder 2.4L?
Yes. Bosch 15580 is listed for the 2006-2012 Mitsubishi Eclipse 4-cylinder 2.4L.
Is this BOSCH O2 sensor heated?
Yes. Bosch 15580 is a narrow-band heated oxygen sensor with an M18 - 1.5 thread and a 22 mm hex.
What comes with this BOSCH premium oxygen sensor?
The listing is one oxygen sensor with its wiring harness. A mounting bracket is not included.
Is anti-seize already on the threads of this oxygen sensor?
Yes. Conductive anti-seize is pre-applied to the threads, and the connectors are direct-fit for quick installation.
