Bosch 15895 oxygen sensor for the 2005-2007 Chevrolet Equinox V6 3.4L and other vehicles measures the air-fuel ratio in the exhaust and sends it to the ECU. This Bosch O2 sensor is a switching-type unit that helps keep combustion stable and emissions down across a range of operating conditions.
- Narrow-band heated design with an integrated heater element and optimized heater control
- Advanced ceramic element for consistent readings under thermal and vibration loads
- TSP coating and metal housing resist vibration, corrosion and contamination in exhaust up to 1,880°F
- Reaches operating temperature in less than 10 seconds for quick closed-loop control
Quick facts
- Part: Bosch 15895 oxygen sensor
- Fits: 2005-2007 Chevrolet Equinox V6 3.4L and other vehicles
- Position: upstream, downstream, upstream left, upstream right, downstream left, downstream right
- Material: Metal
- Condition: New
A failing oxygen sensor can show up as a check engine light, a rough idle or poorer fuel economy, though the same signs have other possible causes. Before replacing it, look over the wiring, the connector and the sensor body with the engine off and cool, and check for damage or exhaust leaks nearby.
Fits
The vehicles it fits include the 2003-2005 Chevrolet Silverado 1500 V8 4.8L, the 2003-2006 Silverado 1500 V6 4.3L, the 2003-2007 Silverado 1500 V8 6.0L, the 2007 Silverado 1500 V8 4.8L or 5.3L, the 2004-2007 Chevrolet Malibu V6 3.5L and the 2006-2007 Malibu V6 3.9L. If your vehicle is not named here, run its year, model and engine through the "Vehicles it fits" section. This listing is one sensor, and a vehicle takes one or two depending on the vehicle and engine.
Specifications
Fit and size
- Position: upstream, downstream, upstream left, upstream right, downstream left, downstream right
- Thread size: M18 - 1.5
- Hex size: 22 mm
- Length (sealing surface to end of connector): 16.9 in
- Quantity per vehicle: one or two, depending on the application
Build and materials
- Sensor type: narrow-band, heated
- Housing material: Metal
- Coating: TSP coating
- Wiring harness: included
- Condition: New
- Warranty: Bosch 1-year, unlimited-mileage warranty for non-commercial passenger cars and light trucks
In the box
One oxygen sensor with its wiring harness. A mounting bracket is not included.
Installation notes
- Direct-fit connectors allow quick installation.
- Conductive anti-seize is pre-applied to the threads.
Frequently Asked Questions
Does this Chevy Equinox oxygen sensor fit the 2005-2007 Chevrolet Equinox V6 3.4L?
Yes. Bosch 15895 fits the 2005-2007 Chevrolet Equinox V6 3.4L, and that vehicle takes one. For another year or engine, look it up in the "Vehicles it fits" section.
Is the Bosch 15895 the right Chevy Malibu oxygen sensor for the 2004-2007 Chevrolet Malibu V6 3.5L?
Yes. Bosch 15895 fits the 2004-2007 Chevrolet Malibu V6 3.5L and the 2006-2007 Malibu V6 3.9L, and the listed quantity for both is two.
Is this Bosch premium oxygen sensor narrow-band or wideband?
It is a narrow-band, heated, switching-type sensor. This oxygen sensor has an M18 - 1.5 thread and a 22 mm hex.
Is the wiring harness included with this oxygen sensor?
Yes. The wiring harness is included with the sensor; a mounting bracket is not.
Do I need to put anti-seize on the threads of this oxygen sensor?
No. Conductive anti-seize is already applied to the threads, and the sensor has direct-fit connectors.
