Bosch Oxygen Sensor P/N:17036
Bosch 16453 left oxygen sensor for the 2012-2015 Chevrolet Camaro V6 3.6L and other vehicles measures oxygen in the exhaust and reports air-fuel-ratio readings to the ECU.
A check engine light, a rough idle or lower fuel economy can mean an oxygen sensor is wearing out. These signs alone do not prove the sensor is at fault, since a vacuum leak is another common cause.
It is a direct-fit replacement for the 2012-2015 Chevrolet Camaro V6 3.6L, and it works as an oxygen sensor for the 2012-2013 Cadillac CTS V6 3.0L and the 2012-2014 CTS V6 3.6L.
Fit and size
Build and materials
One oxygen sensor with its wiring harness. This listing holds one sensor, and the left side takes one; the right side is a separate part ordered on its own. A mounting bracket is not included.
Is this the Camaro oxygen sensor for the 2012-2015 Chevrolet Camaro V6 3.6L?
Yes. Bosch 16453 is the downstream left oxygen sensor for the 2012-2015 Chevrolet Camaro V6 3.6L, and that side takes one.
Does the Bosch 16453 come with its wiring harness?
Yes. Bosch 16453 includes its wiring harness. A mounting bracket is not included.
What thread and hex size does this Bosch premium oxygen sensor have?
It has an M18 - 1.5 thread and a 22 mm hex. This is a heated, narrow-band sensor.
How do I know if a Bosch O2 sensor like this downstream one is wearing out?
A check engine light, a rough idle or poor fuel economy can mean it is wearing out. A shop can test the sensor's signal to confirm.
Do I need to add anti-seize to the Bosch 16453 threads?
No. Conductive anti-seize is already pre-applied to the threads, and the connector is a direct-fit type.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.